Installing a replacement 2.5"" disk drive into a DDIC:
Install the replacement disk drive in the DDIC before opening the drawer of the enclosure to remove the failed drive.
Install the 2.5"" replacement disk drive into the 3.5"" mounting bracket.
Insert the SAS connector into the SAS interface on the disk drive.
Insert the 3.5"" mounting bracket with the 2.5"" disk drive into the lower assembly.
Remove the protective film from the upper assembly of the DDIC.
Slide the upper assembly of the DDIC onto the mounting bracket with the 2.5"" disk drive
Secure the upper assembly to the mounting bracket using the supplied screws.
Attach the appropriate drive size label to the label location on top of the upper assembly.
