In this video, we will cover the process of installing SLES 12 from a DVD using an optical drive. To begin the installation, turn on the system, and then insert the SLES 12 installer DVD media into the optical drive.
Press F2 to go to the System Setup page. Select System BIOS, click Boot Settings, and then click Boot Option Settings. On the Boot Option Settings page, click Boot Sequence.
You must ensure that Optical Drive where the DVD is located appears first in the list followed by the Hard drive. Then, click OK. Click Hard-Disk Drive Sequence and ensure that Embedded SATA disk is the only device in the list. And then click OK.
Click Back until you can view the System BIOS Settings page. Click Finish, and then click Yes in the Saving Changes dialog box. Next, click OK on the success message to exit the BIOS settings.
To exit from System Setup, click Finish, and then click Yes on the confirm exit message. The system restarts automatically. Now click Installation.
The system loads the Linux Kernel and then initializes the installation environment. Next, read the license agreement, if you agree to the license terms, select I Agree to the License Terms, and then click Next.
The system now initializes the Network Configuration, and displays the Network devices available in the system. If you want to configure these devices click Edit and if not click Next to continue.
The system now loads the probes connected and the related system files. After this is complete, on the registration page, type your email address and registration code and then click Next.
If you choose to skip registration, you will not be able to access to the update repositories until registration has been completed. Continue to click Next until the Create New User Login page is displayed.
Now create your profile by providing the details in the respective fields, then click Next. If you click next without creating a user login, you will receive this message.
After reading it, Click yes if you wish to proceed. Type the password in the Password for root User and the Confirm Password fields, and then click Next.
In the event that the password entered is too simple then you will get a warning message. You can click Yes to continue or No to create a different password.
The system now exports the configuration, after this is complete, click Install. Click Install again to confirm the installation. After the installation is complete, click OK to reboot the system.
While the system is rebooting, remove the SLES installation DVD. The system now will boot from the local disk. At this point, type your username and password to log in to SUSE Linux Enterprise Server.
The process is now complete. For more information and support items visit dell.com/support.
