In this video, we will demonstrate how to remove and install the front bezel. Before removing the front bezel, read through the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines see the OptiPlex 7080 Small Form Factor Service Manual at Dell.com/support.
Before you begin, ensure that you turn off your computer and disconnect all attached peripherals. To remove the side cover slide the release latch to the right until you hear a click. Slide the cover towards the back of the system. Lift the side cover from the computer. Now, let’s remove the front bezel.
To remove the front bezel, gently pry the retention tabs to release one side of the front bezel from the computer. Remove the front bezel away from the computer. You have now successfully removed the front bezel. Now, let’s see how to install the front bezel. To begin, align the tabs on the right side of the front bezel with the slots on the chassis. Rotate the front bezel towards the chassis until the tabs on the left side of the bezel snap into their slot on the chassis.
You have now successfully installed the front bezel. Align the tabs on the side cover with the slots on the chassis and replace the side cover on the chassis. Slide the side cover towards the front of the system until you hear the release latch click. Now, connect all peripherals and turn on your computer. For more information, see the Service Manual at Dell.com/support.
