This video shows how to replace the PC IE fan on an Alienware, Aurora R 13 and or Alienware Aurora Risin edition R 14. Before you begin, create a recovery drive and back up all data power off the computer and disconnect all attached peripherals ensure that you always use ESD protection when working inside the computer to begin, pull the cable cover away from the computer.
The cable cover is an optional accessory skip this step. If the cable cover is not shipped with the computer loosen the captive screw that secures the left side cover, release latch to the chassis, pull the left side cover, release latch to release the left side cover away from the chassis.
Lift the left side cover from the chassis, lay the computer on its right side. Locate the PC IE fan slide the release latch to the unlocked position and lift the graphics card and holder away from the chassis disconnect the PC IE fan cable from the system board, push the tab to release the PC IE fan from the chassis slide and lift the PC IE fan off of the chassis. You have successfully removed the PC IE fan.
Now let's install the PC IE fan, lay the computer on its right side, align the tabs on the PC IE fan with the slots on the chassis slide and push the fan until the releasing clip snaps into position on the chassis. Connect the PC IE fan cable to the system board. Replace the graphics card and holder.
Now let's install the left side cover, locate the tabs on the left side cover and slots on the chassis, rotate the left side cover towards the chassis until it snaps into place, tighten the captive screw that secures the left side cover. Release latch to the chassis place the cable cover back at the rear of the chassis.
The cable cover is an optional accessory skip this step. If the cable cover is not shipped with the computer, the PC IE fan installation process is now complete for more information or assistance visit dell dot com forward slash support.
