Here's how to replace the imaging drum on your E310, 514, or 515 printer. We're using an E310 here, but all three models use the same drum, and it's changed in the same way. Switch the power off. Open the front cover.
Then pull on the imaging drum handle to remove it. Press the blue button to unlock the toner cartridge. Then remove it from the drum. Unpack your new drum and remove any packing material.
Fit your toner to the new drum. Clean the corona wire by sliding the blue tab to the right, then fully back to the left. Slide the drum back into the printer.
Then close the front cover and switch the power on. You can buy replacement drums online at dell.com/supplies. To recycle old drums, go to dell.com/recycling.
Thanks for watching.