How to replace the front bezel on a Dell EMC PowerEdge R350

Learn how to replace the front bezel on a Dell EMC PowerEdge R350. This video shows how to remove and install the front bezel on a Dell EMC PowerEdge R350. Before you begin, power off the system, and disconnect all the attached peripherals. Ensure that you always use ESD protection when working inside the system. If you need more information or assistance, go to https://www.dell.com/poweredgemanuals.

This video shows how to replace the front bezel on a PowerEdge R350.

Before you begin, power off the system, and disconnect all the attached peripherals. Ensure that you always use ESD protection when working inside the system.

For more information about safety guidelines, see the Service manual at: Dell.com/poweredgemanuals For front bezel, first unlock the bezel using the key provided with the system.

Rotate the key in clockwise direction to unlock the front bezel. Now press the release button to disengage the front bezel from the system.

Now slowly pull the left side of the front bezel away from the system, and then unhook the right end of the bezel from the system.

To replace the front bezel, first place the bezel tabs into the bezel slots, then press the bezel into the system until the release button clicks in place.

Now lock the front bezel using the key provided with the system by rotating the key in counterclockwise direction. You have replaced the front bezel on a PowerEdge R350.

If you need more information or assistance, go to dell.com/poweredgemanuals.