Prerequisites
Follow the safety guidelines listed in Safety instructions.
Turn off the system, including all attached peripherals.
Disconnect the system from the electrical outlet and disconnect the peripherals.
If applicable, remove the system from the rack.
Remove the system cover.
Remove the cooling fan:
Holding the touch points on the cooling fan, lift the fan to disconnect the connector on the fan from the connector on the system board.
Lift the fan out of the system.
Removing the right control panel:
Lift the cable latch and disconnect the control panel cable from the connector on the system board.
NOTE:Ensure that you note the routing of the cables as you remove them from the system board. You must route the cables properly when you replace them to prevent the cables from being pinched or crimped.
Using a Phillips #1 screwdriver, remove the screws that secure the cable cover to the system.
Using a Phillips #1 screwdriver, remove the screw that secures the control panel to the system.
Holding by the sides, remove the right control panel away from the system.
Holding the control panel by its sides, remove the control panel away from the system.
Installing the right control panel:
Route the control panel cable through the side wall of the system.
Align the right control panel assembly with the control panel slot on the system.
Connect the control panel cable to the connector on the system board and lower the cable latch to secure the cable in place.
Using a Phillips #1 screwdriver, install the screw that secures the control panel to the system.
Using a Phillips #1 screwdriver, install the screws that secure the cable cover to the system.
Installing a cooling fan:
Holding the touch points on the cooling fan, align the connector on the cooling fan with the connector on the system board.
Push the cooling fan, by pressing on the touch point, till the fan is firmly seated on the connector.
Reconnect the peripherals and connect the system to the electrical outlet.
Turn on the attached peripherals and then turn on the system.