Article Number: 000128681
PowerStore Alerts: Drive Wear-Level Alerts
Summary: The article provides solutions when facing different drive endurance levels. PowerStore
Article Content
Symptoms
When Dell PowerStore encounters a problem, an error alert is generated to help identify the issue. This article explains the different possible causes and the relevant solutions for these error alerts. If your problem is not resolved despite the solution that is provided, check the technical support contact options.
Note: Cannot find the information that you need? Let us know using the feedback form at the bottom of this article.
Note: Cannot find the information that you need? Let us know using the feedback form at the bottom of this article.
| Alert ID | XMS_SSD_ENDURANCE_REMAINING_LIMITED |
| Alert Text | Wear level (endurance) of the drive in bus %(bus_num) enclosure %(encl_num) slot %(enclosure_slot) is low. The remaining wear level for this drive is %(percent_endurance_remaining). |
| Error Code | 0x00306C02 |
| Cause | This alert is raised when the drive's remaining endurance is at or below 5%. Drive continues to function as designed. |
| Resolution | No immediate user action is needed, but drive replacement will be needed soon. Contact technical support for further assistance. |
| Alert ID | XMS_SSD_ENDURANCE_REMAINING_VERY_LIMITED |
| Alert Text | Wear level (endurance) of the drive in bus %(bus_num) enclosure %(encl_num) slot %(enclosure_slot) is very low and has reached a critical level. The remaining wear level for this drive is %(percent_endurance_remaining). |
| Error Code | 0x00306C03 |
| Cause | This alert is raised when the drive's remaining endurance is at or below 2%. Drive continues to function as designed. |
| Resolution | No immediate user action is needed, but drive replacement will be needed soon. Contact technical support for further assistance. |
| Alert ID | XMS_SSD_ENDURANCE_REMAINING_NO_REMAINING |
| Alert Text | Drive endurance level for bus %(bus_num) enclosure %(encl_num) slot %(enclosure_slot) is exhausted. The remaining wear level for this drive is %(percent_endurance_remaining). |
| Error Code | 0x00306C04 |
| Cause | This alert is raised when the drive's remaining endurance has reached its reported limit. The drive may continue to function as designed. |
| Resolution | Drive should be replaced before I/O Errors and/or drive failure occurs. Contact technical support for further assistance. |
Cause
Resolution
Additional Information
Article Properties
Affected Product
PowerStore
Last Published Date
07 Jun 2023
Version
5
Article Type
Solution