Built-in virtual controller enables affordable, enterprise-class WiFi for various environments that is easy to deploy, use and maintain.
Model | W-IAP277, W-IAP274 and W-IAP275 | W-IAP228 | W-IAP224 and W-IAP225 | W-IAP214 and W-IAP215 | W-IAP207 | W-IAP204 and W-IAP205 |
Radios | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n |
5GHz | 1.3Gbps | 1.3Gbps | 1.3Gbps | 1.3Gbps | 867Mbps | 867Mbps |
2.4GHz | 600Mbps | 600Mbps | 600Mbps | 450Mbps | 400Mbps | 450Mbps |
Number of BSSIDs per radio | Up to 16 | Up to 16 | Up to 16 | Up to 16 | Up to 16 | Up to 16 |
Max IPSEC encrypted wired throughput (remote mode) | 20Mbps | 20Mbps | 100Mbps | 20Mbps | 20Mbps | 20Mbps |
Minimum Instant software version | 4.1.0.0 (W-IAP274, W-IAP275) 4.2.0.0 (W-IAP277) | 4.2.0.0 | 4.0.0.1 | 4.1.1.0 | 4.3.1.0 | 4.1.1.0 |
Integrated antennas | 3x 2.4 and 5GHz Omni (W-IAP275) 3x 80° H x 80° V beamwidth directional antennas (W-IAP277) | None | Omni downtilt (W-IAP225) | 6x omni downtilt (W-IAP215) | 2x omni downtilt | 4x omni downtilt (W-IAP205) |
RF connectors | 6x Nf (W-IAP274) | 6x Nf | 3x RP-SMA, dual-band (W-IAP224) | 3x RP-SMA, dual-band (W-IAP214) | No | 2x RP-SMA, dual-band (W-IAP204) |
Network interfaces | 2x GbE | 2 x GbE | 2x GbE | 1x GbE | 1x GbE | 1x GbE |
Jumbo frame support on uplink | Yes | Yes | Yes | Yes | Yes | Yes |
Other interfaces | Console Port micro-USB | Console Port micro-USB | 12VDC (optional power adapter) Console Port RJ-45 | 12VDC (optional power adapter) Console Port RJ-45 | 12VDC (optional power adapter) Console Port RJ-45 | 12VDC (optional power adapter) Console Port RJ-45 |
Power over Ethernet (PoE) interfaces | POE-PD: 802.3at POE-PSE: No | POE-PD: 802.3at POE-PSE: No | POE-PD: 802.3at/af POE-PS: No | POE-PD: 802.3af POE-PS: No | POE-PD: 802.3at/af POE-PS: No | POE-PD: 802.3af POE-PS: No |
Power consumption | 23W | 23W | 15W, plus up to 2.5W for attached USB device | Maximum (worst-case) power consumption: 14.9W (PoE) or 13.6W (DC) | Maximum (worst-case) power consumption: 12.3W (PoE) or 10.1W (DC) | Maximum (worst-case) power consumption: 12.5W (PoE) or 11.7W (DC) |
Class | Outdoor | Outdoor | Indoor, plenum-rated | Indoor, plenum-rated | Indoor, plenum-rated | Indoor, plenum-rated |
Operating temp. | Temperature: –40° to +65° C (–40° to +150° F) Humidity: 5% to 95% non-condensing | Temperature: -40° to 60° C (-40° to 140° F) Humidity: 5% to 95% noncondensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 93% non-condensing | Temperature: 0° to 40° C (32° to 104° F) Humidity: 5% to 95% non-condensing |
Combine enterprise capabilities with entry-level simplicity through Dell Networking W-Series instant access points (IAPs) with built-in virtual controllers. When multiple IAPs are connected, a single IAP acts as a primary virtual controller. If that controller fails, another Dell Networking W-Series IAP in the chain automatically takes over as the primary virtual controller without disrupting services. To expand your network, just add more Dell Networking W-Series IAPs. Configuration is automatically uploaded from the primary virtual controller.
The virtual controller technology is able to monitor and control critical network maintenance tasks, including:
Be up and running in minutes, provisioning your Dell Networking W-Series IAPs in a few easy steps using virtually any laptop’s wireless connection. Dell Networking W-Series IAPs are designed to provide enterprise-class networking services without enterprise-size complexity and include an expanded wired + wireless IAP portfolio with high-end wireless features for hotspots and remote branches.
As WLAN requirements grow, configuration settings can be used to easily convert the Dell Networking W-Series IAPs to campus APs that work with a centralized-controller architecture.
Securely manage and administer a Dell Networking W-Series IAP WiFi network from a single built-in web-based GUI.
Manage multiple Dell Networking W-Series IAP WiFi networks using Dell Networking W-Series AirWave Software Management Suite (AWMS). AirWave manages local or geographically dispersed deployments and aggregates them into one console. It gives you a single, accurate picture of everything that affects service quality for your users — from the wired infrastructure to the RF environment to individual mobile devices.
Dell Networking W-Series IAPs with Dell Adaptive Radio Management (ARM) technology help ensure that data, voice and video applications have sufficient network resources to operate properly, allowing maximum client performance while enhancing stability and predictability of the entire WiFi network. ARM features include:
Dell Networking W-Series IAP334 and IAP335 802.11ac instant access points Dell Networking W-Series IAP334 and IAP335 instant access points (IAPs) provide switch-like performance with 802.11ac Wave 2 capabilities. These IAPs feature 4x4:4SS MU-MIMO capability and provide the fastest gigabit data speeds available to eliminate bottlenecks in multi-gigabit Ethernet wired network infrastructures. The IAP334 and IAP335 IAPs support concurrent dual-radio operation with a maximum data rate of 1.7Gbps in the 5GHz band and 800Mbps in the 2.4GHz band. | |||||||||||||||||
Dell Networking W-Series IAP324 and IAP325 802.11ac instant access points Dell Networking W-Series IAP324 and IAP325 IAPs provide switch-like performance with 802.11ac Wave 2 capabilities. These IAPs provide maximum data throughput efficiency by simultaneously transmitting multicast data to multiple devices, while embedded AppRF™ technology leverages deep packet inspection for management of over 1,500 enterprise applications. The IAP324 and IAP325 IAPs support concurrent dual-radio operation with a maximum data rate of 1.7Gbps in the 5GHz band and 800Mbps in the 2.4GHz band. | |||||||||||||||||
Dell Networking W-Series IAP314 and IAP315 802.11ac instant access points Dell Networking W-Series IAP324 and IAP315 IAPs provide switch-like performance with 802.11ac Wave 2 capabilities. These IAPs feature 4x4:4SS MU-MIMO capability and deliver high performance and superb user experience for mobile devices, Internet of Things (IoT) devices, and applications in dense office environments. The IAP314 and IAP315 IAPs support concurrent dual-radio operation with a maximum data rate of 1.7Gbps in the 5GHz band and 400Mbps in the 2.4GHz band. | |||||||||||||||||
Dell Networking W-Series IAP304 and IAP305 802.11ac instant access points | |||||||||||||||||
Dell Networking W-Series IAP277 and IAP274/275 802.11ac outdoor instant access points Dell Networking W-Series IAP277 and IAP274/275 IAPs deliver Gigabit WiFi performance to 802.11ac mobile devices. These APs are purpose-built to survive harsh outdoor environments, including extreme high and low temperatures as well as persistent moisture and precipitation, and fully sealed to keep out airborne contaminants. With a maximum data rate of 1.3Gbps in the 5GHz band and 600Mbps in the 2.4GHz band, the IAP277 and IAP274/275 instant APs support concurrent dual-radio operation. | |||||||||||||||||
Dell Networking W-Series IAP228 802.11ac instant access point The Dell Networking W-Series IAP228 IAP delivers gigabit WiFi performance to 802.11ac mobile devices in harsh, weather-protected environments such as warehouses, industrial freezers or stadium enclosures. With a maximum data rate of 1.3Gbps in the 5GHz band and 600Mbps in the 2.4GHz band, the IAP228 is three times faster than 802.11n APs and provides performance similar to a wired connection. | |||||||||||||||||
Dell Networking W-Series IAP224/225 802.11ac instant access points Dell Networking W-Series IAP224 (external antenna) and IAP225 (internal antenna) 802.11ac IAPs support the 5GHz industry standard for gigabit wireless data rates. These purpose-built 3x3 multiple-input and multiple-output (MIMO) 802.11ac APs are designed to deliver up to three times higher performance than comparable 802.11n APs. The IAP224 and IAP225 each include dual GbE ports to access wired backbones and are powered by Power-over-Ethernet 802.3at (PoE+) or an optional adapter. | |||||||||||||||||
Dell Networking W-Series IAP214/215 802.11ac instant access points Dell Networking W-Series IAP214/215 IAPs maximize mobile device performance in medium-density WiFi environments. These multifunctional, affordable APs support 5GHz 802.11ac clients at data rates of up to 877Mbps and 2.4GHz 802.11n clients at up to 300Mbps. You can power Dell Networking W-Series IAP214/215 IAPs with a 12V DC nominal, +/- 5 percent or a PoE 48V DC (nominal) 802.3af compliant source. | |||||||||||||||||
Dell Networking W-Series IAP207 802.11ac instant access points Dell Networking W-Series AP207 APs deliver high performance 802.11ac for medium density enterprise environments. 207 Series APs support 5GHz 802.11ac clients at data rates of up to 867Mbps and 2.4GHz 802.11n clients at up to 400Mbps (for an aggregate peak data rate of 1.3Gbps). You can power Dell Networking 207 Series APs with a 12V DC nominal, +/- 5 percent or a PoE 48V DC (nominal) 802.3af compliant source. | |||||||||||||||||
Dell Networking W-Series IAP205H 802.11ac instant access point The IAP205H IAP combines high-performance wireless mobility with wired Gigabit Ethernet access in a surprisingly compact, multifunctional and affordable device. The IAP205H delivers 5GHz 802.11ac at data rates of up to 867Mbps and 2.4GHz 802.11n clients at up to 400Mbps. | |||||||||||||||||
Dell Networking W-Series IAP204/205 802.11ac instant access points Dell Networking W-Series IAP204/205 IAPs maximize mobile device performance in medium-density enterprise WiFi environments. These multifunctional, affordable APs support 5GHz 802.11ac clients at data rates of up to 877Mbps and 2.4GHz 802.11n clients at up to 300Mbps. You can power Dell Networking W-Series 204/205 IAPs with a 12V DC nominal, +/- 5 percent or a PoE 48V DC (nominal) 802.3af compliant source. | |||||||||||||||||
Dell Networking W-Series IAP103 802.11ac instant access point | |||||||||||||||||
Dell Networking W-Series IAP108/109 wired + wireless instant access points Multifunctional dual-radio W-Series IAP108 (connecters for external antenna) and IAP109 (four integrated antennas) are 802.11abgn, 2x2:2 MIMO APs with instant or remote AP modes for wireless and wired networking in large deployments. With 300Mbps wireless data rate for each radio, these IAPs feature:
| |||||||||||||||||
Dell Networking W-Series IAP3WN/IAP3WNP wired + wireless instant access points Dell Networking W-Series IAP3WN and IAP3WNP are enterprise-grade portable or desktop 802.11n indoor APs that offer data rates of up to 300Mbps. The IAP3WNP includes a PoE-capable LAN port that can power an external PoE-enabled device, such as an IP phone. The Dell Networking W-Series IAP3WN features:
|
Model | W-IAP334 and W-IAP335 | W-IAP324 and W-IAP325 | W-IAP314 and W-IAP315 | W-IAP304 and W-IAP305 |
Radios | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n | Dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO |
5GHz | 1.7Gbps | 1.7Gbps | 1.7Gbps | 1.3Gbps |
2.4GHz | 800Mbps | 800Mbps | 400Mbps | 400Mbps |
Number of BSSIDs per radio | Up to 16 | Up to 16 | Up to 16 | Up to 16 |
Max IPSEC encrypted wired throughput (remote mode) | 20Mbps | 20Mbps | 20Mbps | 20Mbps |
Minimum Instant software version | 4.3.0.0 | 4.3.0.0 | 4.3.0.0 | 4.3.1.0 |
Integrated antennas | 12x 2.4 and 5GHz omni (W-IAP335) | 8x 2.4 and 5GHz omni (W-IAP325) | 4x 2.4 and 5GHz omni (W-IAP315) | 3x 2.4 and 5GHz omni (W-IAP305) |
RF connectors | 4x RP-SMA (W-IAP334) | 4x RP-SMA (W-IAP324) | 4x RP-SMA (W-IAP314) | 3x RP-SMA (W-IAP304) |
Network interfaces | GbE, 2.5GbE | 2x GbE | 2x GbE | GbE |
Jumbo frame support on uplink | Yes | Yes | Yes | Yes |
Other interfaces | HPE Smart Rate, 10/100/1000BASE-T Ethernet (RJ-45), DC power, USB 2.0 host, BLE radio | 2x 10/100/1000BASE-T Ethernet (RJ-45), DC power, USB 2.0 host, BLE radio | 10/100/1000BASE-T Ethernet (RJ-45), DC power, USB 2.0 host, BLE radio | 10/100/1000BASE-T Ethernet (RJ-45), DC power, USB 2.0 host, BLE radio |
Power over Ethernet (PoE) interfaces | PoE-PD: 802.3at/af POE-PS: Yes | PoE-PD: 802.3at/af POE-PS: Yes | PoE-PD: 802.3at/af POE-PS: Yes | PoE-PD: 802.3at/af POE-PS: Yes |
Power consumption | 10.9W | 8W | 6.4W (PoE) or 5.9W (DC) | 13W |
Class | Indoor | Indoor | Indoor | Indoor |
Operating temp. | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 50° C (32° to 122° F) Humidity: 5% to 95% non-condensing |
Model | W-IAP103 | W-IAP108 and W-IAP109 | W-IAP3WN and IAP3WNP | W-IAP205H |
Radios | Dual radio, 5GHz and 2.4GHz 802.11n | Dual-radio, dual-band 802.11n | Single radio: 2.4GHz band | Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n |
5GHz | 300Mbps | 300Mbps | n/a | 867Mbps |
2.4GHz | 300Mbps | 300Mbps | 300Mbps | 400Mbps |
Number of BSSIDs per radio | Up to 16 | Up to 16 | Up to 8 | Up to 16 |
Max IPSEC encrypted wired throughput (remote mode) | 10Mbps | 20Mbps | 20Mbps | 20Mbps |
Minimum Instant software version | 4.1.0.0 | 3.2.0.0 | 3.0.0.0 | 4.2.0.0 |
Integrated antennas | 2x omni downtilt | 4x omni (W-IAP109) | 2x omni | 4x semi-directional |
RF connectors | n/a | 2x RP-SMA, dual-band (W-IAP108) | n/a | No |
Network interfaces | 1x GbE | 1x GbE + 1x FE | 3x FE | 4 x GbE 2 x Pass-through |
Jumbo frame support on uplink | No | No | No | Yes |
Other interfaces | 12VDC (optional power adapter) Console Port Header | 12VDC (optional power adapter) Console Port RJ-45 USB Host Port | W-IAP3WN: 12VDC (power adapter in-box) W-IAP3WNP: 48VDC (power adapter in-box, order power cord separately) Console Port Header USB Host Port | 12VDC (optional power adapter) Console Port RJ-45 |
Power over Ethernet (PoE) interfaces | POE-PD: 802.3af POE-PS: No | POE-PD: 802.3af/at POE-PS: No | POE-PD: No POE-PS: W-IAP3WNP 1x 802.3af | POE-PD: 802.3af/at PoE-PSE: 802.3af |
Power consumption | 9.5W (PoE) or 8W (DC) | Without USB device connected: 12.5 watts With USB device: 15 watts | W-IAP3WN: 4 watts/6.5 watts W-IAP3WNP: 5.5, 8, or 26 watts | DC: 12W (excluding PoE-PSE, USB) 802.3at PoE: 13W (excluding PoE-PSE, USB) 802.3af PoE: 13W |
Class | Indoor, plenum-rated | Indoor | Indoor | Indoor, plenum-rated |
Operating temp. | Temperature: 0° to 40° C (32° to 104° F) Humidity: 5% to 95% non-condensing | Temperature: 0° to 40° C (32° to 104° F) Humidity: 5% to 95% non-condensing | 0° to 40° C (32° to 104° F) | Temperature: 0° to 40° C (32° to 104° F) Humidity: 5% to 95% noncondensing |
From drivers and manuals to diagnostic tools and replacement parts, Dell Product Support has you covered!
{{Model.SummaryText}}
{{Model.OptionHeaderText}} | {{Model.ArrivesHeaderText}} | {{Model.CostHeaderText}} |
---|---|---|
{{option.ShippingOptionText}} |
{{option.EnsureDeliveryDateText}}
{{option.ShopCfcDCArrivesText}}
|
{{option.OptionCostText}}
|
{{shippingModel.EstimatedDeliveryModel.InvalidPostalCodeErrorMessage}}
{{shippingModel.EstimatedDeliveryModel.ErrorMessage}}
Add the products you would like to compare, and quickly determine which is best for your needs.
Add the products you would like to compare, and quickly determine which is best for your needs.