Dell ML3 Tape Library

Software

Code Updates:
Web and either host bus or RMU for drives
Web and RMU only for library code updates

Management

There are two user interfaces:

Operator Control Panel: Located on the front of the ML3 tape library, the user can use an LCD panel to check system status, run diagnostics, view system logs, check and set configuration, verify drive operations, run an inventory and manage the system.

Remote Web Management: The web based administration can be accessed via a 10/100/1000 BaseT connection through any standard web browser. The user can check system status, run diagnostics, view system logs, check and set configuration, verify drive operations, run an inventory and manage the system. In addition, the user can upgrade the drive and library firmware via the RMU.

Environmental Operating Conditions

Temperature: 50 to 95 degrees F, 10 to 35 degrees C.
Relative Humidity: 20% RH to 80% RH (non-condensing)
Electrical Power: 5.0 – 3.5 amps, 100 – 240 V 50 / 60 Hz, 350 W

Regulatory

Product Safety and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment