Eaton ePDU G3 Managed technology provides a best-in-class design featuring billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure current, voltage, power and en... Show More
Eaton ePDU G3 Managed technology provides a best-in-class design featuring billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure current, voltage, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting. Outlet switching allows for on, off or reboot of individual outlets, which reduces the cost of managing remote or local IT data center environments. The robust design is UL rated to operate at 140 degrees F (60 degrees C) ambient operating temperature for containment and high temperature environments.
Outlet switching for on, off and reboot control to reduce management costs
Outlet level metering to +/- 1% billing grade accuracy for customer billing or level 3 PUE calculations
LCD pixel display with hot-swap capability enables load balancing and local setup of key parameters such as IP address and display orientation
High operating temperature (140 degrees F / 60 degrees C) for containment or hot network closet environments
Daisy chain of IP addresses allows four devices to share one network connection to reduce network install costs by up to 75%
IEC outlet grip plug retention secures plugs in place using standard cables
Enables on/off/reboot capabilities for a single piece of equipment with outlet-level control
Single-phase and three-phase configurations provide solutions for SMB and networking closets, blade server applications, and colocation and large data centers
ePDU G3 Managed provides ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter, IEC grip outlets, color-coded circuits and the ability to daisy chain four ePDUs to share the same network connection and IP address
Measures outlet-level power consumption and delivers Level 3 PUE to increase accuracy and precision of energy analysis
Manages entire environment remotely over the network from a single interface
Cisco EnergyWise Certified- Eaton's new ePDUs are Cisco EnergyWise Certified
Shop Similar Products
Tech Specs
Technical Information
PDU Type
Switched
Plug/Connector Type
NEMA L6-30P
Plug/Connector Detail
1 x NEMA L6-30P
Receptacle Type
IEC 60320 C13
IEC 60320 C19
Receptacle Detail
20 x IEC 60320 C13
4 x IEC 60320 C19
Power Description
Input Voltage
230 V AC
Output Voltage
230 V AC
Power Rating (Watt)
5760 W
Input Current
24 A
Circuit Breaker
Yes
Interfaces/Ports
Serial Port
Yes
Network (RJ-45)
Yes
Physical Characteristics
Product Color
Black
Mounting Orientation
Vertical
Rack Height
38U
Cord Length
10 ft
Height
66.5"
Width
2.1"
Depth
2.1"
Miscellaneous
Certifications & Standards
cUL
Country of Origin
China
Warranty
Limited Warranty
3 Year
Compare Products ()
Add the products you would like to compare, and quickly determine which is best for your needs.
Add the products you would like to compare, and quickly determine which is best for your needs.