Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

FN IO Module for FX2 Chassis

No-fuss network integration

Simplify FX2 cabling with plug-and-play converged I/O and Fiber Channel connectivity. Full L2/L3 capability enhances data center performance.

Performance

MAC addresses: 64K
Switch fabric capacity: 240 Gbps (Full-Duplex)
Forwarding capacity: 179 Mpps
Link aggregation: Up to 12 members per group, 24 LAG groups with stack support
In standalone mode, max 4 members per group and 1 uplink LAG group (Port-channel 128 default mode)
In stacking mode: max of 12 members per group and 1 uplink LAG group (stacking mode with FN410S and FN410T)
In PMUX mode: max of 24 LAG groups and multiple uplink LAG groups
In full-switch mode: max of 24 LAG groups and multiple uplink LAG groups
Line-rate Layer 2 switching: All protocols, including IPv4
Line-rate Layer 3 routing : IPv4 and IPv6
Packet buffer memory: 4MB
CPU memory: 2GB
ACLs ingress egress in full switch mode

Stacking Attributes

Stacked units: Up to 6 IOAs (using 10GbE ports deployed via CLI)
Stacking bandwidth: Up to 40Gbps (using 1 x 10GbE ring)
Stacking topology: Ring and daisy chain
Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)
VLT supported in VLT, PMUX and Full-switch mode.
Stacking supported in stacking, PMUX and Full-switch mode with FN410S and FN410T.

Routing

Layer 3 Routing - full switch mode:
1058 RIPv1
2453 RIPv2
2154 MD5 (OSPF)
1587 NSSA (OSPF)
2328 OSPFv2
2740 OSPFv3
4222 Prioritization and congestion avoidance
4552 OSPFv3 IPsec authentication

BGP:
1997 BGP Communities
2385 BGP MD5
2439 BGP Route Flap Damping
2796 BGP Route Reflection
2918 BGP Route Refresh
3065 BGP Confederations
4360 BGP Extended Communities
4893 BGP 4-byte ASN
5396 BGP 4-byte ASN representations
draft-ietf-idr-restart-06 BG P Graceful Restart
1195 Routing IPv4 with IS-IS
5308 Routing IPv6 with IS-IS

Management

1155 SMIv1
1156 Internet MIB
1157 SNMPv1
1212 Concise MIB Definitions
1215 SNMP Traps
1493 Bridges MIB
1850 OSPFv2 MIB
1901 Community-based SNMPv2
2011 IP MIB
2012 TCP MIB
2013 UDP MIB
2096 IP Forwarding Table MIB
2570 SNMPv3
2571 Management Frameworks
2572 Message Processing and Dispatching
2575 SNMPv3 VACM
2576 Coexistence Between SNMPv1/v2/v3
2578 SMIv2
2579 Textual Conventions for SMIv2
2580 Conformance Statements for SMIv2
2618 RADIUS Authentication MIB
2665 Ethernet-like Interfaces MIB
2787 VRRP MIB 2819 RMON MIB (groups 1, 2, 3, 9)
2863 Interfaces MIB
3273 RMON High Capacity MIB
3416 SNMPv2
3418 SNMP MIB
3434 RMON High Capacity Alarm MIB
ANSI/TIA-1057 LLDP-MED MIB
IEEE 802.1AB LLDP MIB
IEEE 802.1AB LLDP DOT1 MIB
IEEE 802.1AB LLDP DOT3 MIB
sFlow.org sFlowv5
FORCE10-IF-EXTENSION-MIB
FORCE10-LINKAGG-MIB
FORCE10-COPY-CONFIG-MIB
FORCE10-MON-MIB
FORCE10-PRODUCTS-MIB
FORCE10-MS-CHASSIS-MIB
FORCE10-SMI FORCE10-SYSTEM-COMPONEN-MIB
FORCE10-TC-MIB
FORCE10-TRAP-ALARM-MIB
FORCE10-FIPSNOOPING-MIB
FORCE10-DCB-MIB
LLDP-EXT-DOT1-DCBX-MIB
IEEE8021-PFC-MIB
DELLl_ITA.REV_1_1.MIB
F10-JUMPSTART-MIB
FORCE10-MSTP-MIB
F10-FPSTATS.MIB
f10-VirtualLinkTrunk.MIB
F10-DCBX.MIB
F10-MS-PLATFORM.MIB

VLAN

802.1Q VLAN tagging
802.3ac frame extensions for VLAN tagging
Native VLAN
802.1D Bridging, STP
802.1s MSTP
802.1w RSTP
Force10 PVST+
2338 VRRP

Multicast

4541 IGMPv1/v2 Snooping
1112 IGMPv1
3569 SSM for IPv4
2236 IGMPv2
4541 IGMPv1/v2 Snooping
3376 IGMPv3 draft-ietf-pim-sm-v2-new-05 PIM-SM

IEEE Compliance

802.1AB LLDP
802.1p L2 Prioritization
802.3ab Gigabit Ethernet (1000Base-T)
802.3ad Link Aggregation with LACP
802.3ae 10GbE (10GBase-X)
802.3u Fast Ethernet (100Base-TX)
802.3x Flow Control
802.3z Gigabit Ethernet (1000Base-X)
ANSI/TIA-1057 LLDP-MED
MTU 12KB

Environmental

Power supply: 100–240V AC 50/60Hz
Max. thermal output: 955.36 BTU/h
Max. current draw per system: 2A at 100/120V AC, 1A at 200/240V AC
Max. power consumption: 123 Watts
ISO 7779 A-weighted sound pressure level: 59.6dBA at 73.4°F (23°C)
Operating temperature: 32° to 140°F (0° to 60°C)
Operating humidity: 10 to 85% (RH), non-condensing
Max. non-operating specifications: Storage temperature: –40° to 158°F (–40° to 70°C)
Storage humidity: 5 to 95% (RH), non-condensing

UL/CSA 60950-1, Second Edition
EN 60950-1, Second Edition
IEC 60950-1, Second Edition Including all National
Deviations and Group Differences
EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide Optical Fibre Communication Systems
FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
Canada: ICES-003, Issue-4, Class A
Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
Japan: VCCI V3/2009 Class A
USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
EN 300 386 V1.4.1:2008 EMC for Network Equipment
EN 55024: 1998 + A1: 2001 + A2: 2003
EN 61000-3-2: Harmonic Current Emissions
EN 61000-3-3: Voltage Fluctuations and Flicker
EN 61000-4-2: ESD
EN 61000-4-3: Radiated Immunity
EN 61000-4-4: EFT
EN 61000-4-5: Surge
EN 61000-4-6: Low Frequency Conducted Immunity
All components are RoHS compliant.

Drivers, Manuals & Support

Dell Support

From drivers and manuals to diagnostic tools and replacement parts, Dell Product Support has you covered!

Intel® Xeon® Scalable Processors

Learn More about Intel

Add the products you would like to compare, and quickly determine which is best for your needs.

Add the products you would like to compare, and quickly determine which is best for your needs.