偶怎么看到HBA的Extrnal WWN呢？

​本来想知道存储映射给每一个主机的大小的，看到手册上 ​​SYMDISK ​​有这样的语法:symdisk show -sid xxx -wwn yyyyyyyyyyyyyyyy​

​可是仔细看了一下原来这个WWN是HBA的extrnal WWN.​

​但是偶运行的主机的HBA卡要么是这样的：​

​HBA Type : FibreChannel​
​HBA Name : com.hp.fcd-1​
​Vendor : Hewlett-Packard​
​Model : AB378-60101 ​
​Serial Number : JP50040248​
​Firmware Version : 4.0.91​
​Driver Version : @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23​
​Node WWN : 5001438007d17d2d​
​Number of Ports : 1​

​ Port WWN : 5001438007d17d2c​
​ Port name : /dev/fcd0​
​ Port type : NPort​
​ Port FCID : 67584​
​ Port speed : 4gbit​
​ Supported speed : 4gbit​
​ Port state : Online​
​ Supported COS : 00000008​
​ Supported FC4 types : 0001000000000000000000000000000000000000000000000000000000000000​
​ Active FC4 types : 0801000000000000000000000000000000000000000000000000000000000000​
​ Max frame size : 2048​

​要么是​

​fcmsutil /dev/fcd2​

​ Vendor ID is = 0x001077​
​ Device ID is = 0x002422​
​ PCI Sub-system Vendor ID is = 0x00103c​
​ PCI Sub-system ID is = 0x0012d7​
​ PCI Mode = PCI-X 133 MHz​
​ ISP Code version = 4.0.91​
​ ISP Chip version = 3​
​ Previous Topology = UNINITIALIZED​
​ Link Speed = UNKNOWN​
​ Local N_Port_id is = None​
​ Previous N_Port_id is = None​
​ N_Port Node World Wide Name = 0x5001438004bd5f63​
​ N_Port Port World Wide Name = 0x5001438004bd5f62​
​ Switch Port World Wide Name = 0x0000000000000000​
​ Switch Node World Wide Name = 0x0000000000000000​
​ Driver state = AWAITING_LINK_UP​
​ Hardware Path is = 1/0/8/1/1​
​ Maximum Frame Size = 2048​
​ Driver-Firmware Dump Available = NO​
​ Driver-Firmware Dump Timestamp = N/A​
​ Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23​

​就是看不到所谓的extrnal WWN。​

​改怎么找？​