未解决
1 Rookie
•
6 消息
0
46
请问一下R730XD 含热备的RAID5阵列进行故障硬盘替换的正确步骤？
你好，我有一台R730XD+H730阵列卡，上面用6块8T做了一块raid5阵列，额外加了一块8T磁盘DISK9做热备。上周有一块磁盘DISK7黄灯故障，热备自动上线开始重建并已rebuild is complete。故障硬盘还挂在机器上，我已买了一块8T磁盘，想问下后续替换下故障盘并将新盘做热备的正确步骤是？以下是IDRAC日志信息：
2024-03-03T08:46:20-0600 PDR73
Copyback failed from Disk 9 in Backplane 1 of Integrated RAID Controller 1 to Disk 7 in Backplane 1 of Integrated RAID Controller 1.
2024-03-03T08:46:06-0600 PDR1001
Fault detected on drive 7 in disk drive bay 1.
2024-03-03T08:46:03-0600 PDR70
Copyback started from Disk 9 in Backplane 1 of Integrated RAID Controller 1 to Disk 7 in Backplane 1 of Integrated RAID Controller 1.
2024-03-03T08:46:03-0600 VDR2
Virtual Disk 1 on Integrated RAID Controller 1 returned to optimal state.
2024-03-03T08:46:03-0600 PDR3
Disk 7 in Backplane 1 of Integrated RAID Controller 1 is not functioning correctly.
2024-03-03T08:45:52-0600 PDR15
Disk 9 in Backplane 1 of Integrated RAID Controller 1 rebuild is complete.
2024-02-25T15:12:42-0600 PDR10
Disk 9 in Backplane 1 of Integrated RAID Controller 1 rebuild has started.
2024-02-25T15:12:42-0600 PDR26
Disk 9 in Backplane 1 of Integrated RAID Controller 1 is online.
2024-02-25T15:12:15-0600 PDR1001
Fault detected on drive 7 in disk drive bay 1.
2024-02-25T15:12:12-0600 PDR60
Error occurred on Disk 7 in Backplane 1 of Integrated RAID Controller 1 : (Error 2).
2024-02-25T15:12:12-0600 VDR8
Virtual Disk 1 on Integrated RAID Controller 1 is degraded either because the physical disk drive in the drive group is removed or the physical disk drive added in a redundant virtual drive has failed.
2024-02-25T15:12:12-0600 PDR3
Disk 7 in Backplane 1 of Integrated RAID Controller 1 is not functioning correctly.
hnyr28
4 Operator
4 Operator
•
275 消息
0
2024年3月7日 06:53
你核对硬盘参数一样后，将旧硬盘拔出来，换上新硬盘就可以了，这时候新硬盘和热备盘的指示灯应快速闪，它们在回写。通过管理口可以查看到进度！
jiel
1 Rookie
1 Rookie
•
6 消息
0
2024年3月7日 07:20
@hnyr28 不需要把新硬盘插到其他接口再改成热备盘吗？新硬盘接到disk7上，热备盘的数据会会写到新盘上，继续做热备吗？在当前已进入linux系统的情况下也可以热插拔拔掉disk7硬盘，并将新硬盘插到disk7接口吗？
hnyr28
4 Operator
4 Operator
•
275 消息
0
2024年3月7日 09:08
@jiel 你都说了是新硬盘，它就不需要那么麻烦的操作。热备盘回写都是自动的！不停机更换硬盘，热备回写，还有漫游功能这些都是现在阵列卡的基本功能！
hnyr28
4 Operator
4 Operator
•
275 消息
0
2024年3月7日 09:18
jiel
1 Rookie
1 Rookie
•
6 消息
0
2024年3月7日 09:20
@hnyr28 好的，谢谢。IDRAC已经显示DISK7的操作状态为回写，日志：
2024-03-07T09:04:11-0600 PDR70
Copyback started from Disk 9 on Integrated RAID Controller 1 to Disk 7 on Integrated RAID Controller 1.
2024-03-07T09:04:10-0600 PDR8
Disk 7 in Backplane 1 of Integrated RAID Controller 1 is inserted.
2024-03-07T09:04:10-0600 PDR26
Disk 7 in Backplane 1 of Integrated RAID Controller 1 is online.
2024-03-07T09:03:57-0600 PDR1000
Drive 7 is installed in disk drive bay 1.
2024-03-07T09:02:39-0600 PDR1017
Drive 7 in disk drive bay 1 is operating normally.
2024-03-07T09:02:37-0600 PDR1016
Drive 7 is removed from disk drive bay 1.
chennauo
1 Rookie
1 Rookie
•
8 消息
0
2024年3月9日 01:48
只要硬盘是一样型号，参数一样，接上就可以自动回写重建。
DELL-Leo
Community Manager
Community Manager
•
6.8K 消息
0
2024年3月11日 00:25
一般都会自动重建的，如果没有自动重建，把换上去的盘指定为热备盘就会开始重建了。可以参考下面的文章：
PowerEdge HDD：如何以物理方式更换硬盘（热插拔流程）？
https://www.dell.com/support/kbdoc/zh-cn/000143539/poweredge-hdd-%E5%A6%82%E4%BD%95-%E4%BB%A5-%E7%89%A9%E7%90%86-%E6%96%B9%E5%BC%8F-%E6%9B%B4%E6%8D%A2-%E7%A1%AC%E7%9B%98-%E7%83%AD-%E6%8F%92%E6%8B%94-%E6%B5%81%E7%A8%8B?lang=zh