戴尔存储Dell Storage SC7020忘记密码

您好！

请您尝试一下下面的方法：

Prerequisites

This procedure requires a USB device that contains a partition table with one partition formatted with an MSDOS/FAT32 filesystem. USB devices vary by vendor as to whether they are formatted with or without partitions. Use Windows disk management or other third-party tools to create a partition if the USB device does not have an MSDOS/FAT32 partition.

Steps

1. Create a text file containing the following line of text:
   unlock
   where is typically the Admin username. The Admin account is always on the system and it has the required Administrator privileges to reset passwords.
   Note: The user you are trying to unlock must exist and be enabled.
2. Save the file and name it:
   unlock.phy (Not unlock.phy.txt)
3. Copy the file to a MSDOS/FAT32 formatted USB drive.
4. Insert the USB drive into a port on the lead controller. When the media is recognized, System Manager allows the specified account to log on.
5. Log in to Dell Storage Manager Client connecting to either the lead controller IP, or the Management IP using the account specified on the USB drive. The password cannot be blank, but any text entered will be ignored. In the example below the actual password is “mmm”, but the password used was “qawsdfghyuiol;” to gain access.                                                                                                                          
6. After gaining access to the system reset the password on the account used to gain access.
   Select Edit Settings from the Summary Tab  
7. Select Users and User Groups in the left side tab
   Highlight the user used to gain access to the system
   Select Change Password
   Type anything in to the Authorization Password field
   Type in your new Password for the login selected

8. Remove the USB drive from the port.

If the password reset process does not work please verify you are using the lead controller for this process. If the process still does not work verify the USB formatting, and try using a different USB drive hardware.

Note: This process was tested on SC40, SC8000, SC9000, SC4020, SC2020, SC2080 systems running 6.x, 7.1 – 7.3 using both DSM2106 and DSM 2018.

This process is not guaranteed to be valid on platforms utilizing EHV which include:

SCv3000, SCv3020, SC5020, SC5020F, SC7020, andSC7020F.

Note: Portable Volume is unavailable during the recovery process

您好！

您先试试看默认的用户名和密码，用户名：admin；密码：admin”或“password。

不行的话，再试试之前的那个方法用U盘的方式恢复密码。没有其它方法了。您看下面的英文帖子里也都是用的U盘方式恢复密码。

https://www.dell.com/community/en/conversations/compellent/password-sc8000/647f7fe1f4ccf8a8dee73fb2?commentId=647f8000f4ccf8a8deea00d7

您好！

后台没法重置，操作方法只有之前发的那种U盘解锁。估计还是您那边工具或者操作方法不对导致没办法解锁。您可以续保后申请工程师付费上面提供服务。