panqhv

5 消息

0

7440

2018年6月9日 06:00

EMC硬盘Probation状态是什么意思？一般多久它会完成。 24 25 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

16 17 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 17 18 3 ST4 RAID-10 N - 200.0 GB RW- SP-A DEG:PEER 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 18 19 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 19 20 3 ST4 RAID-10 N - 200.0 GB RW- SP-A DEG:PEER 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 20 21 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 21 22 3 ST4 RAID-10 N - 200.0 GB RW- SP-A DEG:PEER 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 22 23 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 23 24 3 ST4 RAID-10 N - 200.0 GB RW- SP-A DEG:PEER 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

- - 24 25 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)

回复(6)

DELL-Leo

Community Manager

•

7.3K 消息

0

2018年6月25日 19:00

Issue	Why is a drive showing a 'Probation' state? Navisphere Manager shows drive states of Probation: Event Code 0x70B4 - HOST_FRU_START_PROBATION Event Code 0x70B5 - HOST_FRU_END_PROBATION Event Code 0x70CA - HOST_FRU_NOT_PROBATION Event Code 0x70CB - HOST_FRU_CANCEL_PROBATION Event Code 0x70CC - HOST_FRU_POWERUP_PROBATION Event Code 0xA039 - HOST_SPARE_DRIVE_PROBATIONAL

Cause	FLARE Release 24 introduced these new drive states.In previous FLARE releases when the Configuration Manager (CM) received a dead drive notification from the backend, FRU and LUN states transitioned and called 'Needs Rebuild' (NR) processing if required. With FLARE Release 24 the CM determines whether the affected drive should be put into a probational status. Once a drive is in a probation state, FLARE tracks the drive's status internally. The probational status is also displayed visually for a user. If the drive is marked for NR, a request is made to create a rebuild log. If the drive is not marked NR, a non-redundant RAID group (RG) or a fatal failure in a redundant RG, no rebuild log is created. The drive can still remain in a probational state. A probational sniff timer will test the accessibility of all PDs every 30 seconds. The sniff timer is created when the first probational drive comes into existence and cancelled when the last probational drive complete. If the login fails, a sniff retry count is incremented for the drive. When the retry count = max, the probation is cancelled. A rebuild is initiated for a drive marked NR. A message is sent to the rebuild process to start a rebuild for a specific LUN and the probational status for the drive is cleared.Example:08/09/2006 03:48:30 Bus 1 Enclosure 0 Disk 2(801) Soft SCSI Bus Error [0x00] 0 6 8/09/2006 03:48:58 Bus 1 Enclosure 0 Disk 2(7b4) Internal Information Only. FRU is marked for Probation.[0x00] 7a0 8/09/2006 03:48:58 Bus 1 Enclosure 0 Disk 2(7a7) Internal information only. Drive removed, seen by either SP, acknowledged by both SPs completes.[0x00] 3007a 10000 8/09/2006 03:50:04 Bus 1 Enclosure 0 Disk 2(7cc) Internal Information Only. Probation FRU is powering up.[0x00] 7a0 8/09/2006 03:50:05 Bus 1 Enclosure 0 Disk 2(608) CRU Ready [0x00] 7a 25214a80 8/09/2006 03:50:05 Bus 1 Enclosure 0 Disk 2(7b5) Internal Information Only. FRU is out of Probation.[0x00] 7a 0 8/09/2006 03:50:07 Bus 1 Enclosure 0 Disk 2(603) CRU Unit Rebuild Started [0x00] f fff0000 ffffffff ** 3 luns are running a differential rebuild in this time frame. Size = 2GB each. 8/09/2006 03:50:14 Bus 1 Enclosure 0 Disk 2(67d) All rebuilds for a FRU have completed [0x00] f fffffff

Resolution	The probation event messages are informational. No action is required unless the drive goes from a "probational" state to a "removed" state at which time the drive must be replaced.

Notes	A fault light will not be illuminated for a probational drive. The Navisphere Manager and Fibre Command Line Interface (FCLI) will display a probational status. The following drives cannot have a probational state: A drive that is rebuilding Hot spare (HS) drive that is rebuilding Original drive or the corresponding HS drive during an equalize Any drive in an expanding RAID group Drive that is physically removed or removed on one side due to a backend cable fault Proactive candidate or proactive spare drive Two drives that are in same RAID group

Attachments

DELL-Leo

Community Manager

•

7.3K 消息

0

2018年6月21日 00:00

这是信息性的提示。请参考下面的KB

https://emcservice--c.na55.visual.force.com/apex/KB_BreakFix_clone?id=kA2j0000000Qva7

P

panqhv

5 消息

0

2018年6月21日 20:00

你好，谢谢您的回复，不知道是我帐号原因，我无法打开这个链接。能否麻烦单独发到邮箱:pango@139.com.

谢谢！

DELL-Leo

Community Manager

•

7.3K 消息

0

2018年6月25日 19:00

我把KB给你贴出来了。

P

panqhv

5 消息

0

2018年6月28日 04:00

谢谢，Leo Zhenjun Li 的回复，关于1.0.2（PROB）、1.0.0（PROB）这两块硬盘，我通过手动将硬盘下线后进行rebuilding,已经将问题解决了。

DELL-Leo

Community Manager

•

7.3K 消息

0

2018年6月28日 18:00

解决了就好！

查看全部

找不到事件！

企业

EMC硬盘Probation状态是什么意思？一般多久它会完成。 24 25 3 ST4 RAID-10 N - 200.0 GB RW- SP-B DEG 1.0.13 1.0.11 1.0.9 1.0.7 1.0.5 1.0.3 1.0.1 1.0.12 1.0.10 1.0.8 1.0.6 1.0.4 1.0.2 (PROB) 1.0.0 (PROB)