setting up SNMP V3 for Dell powerVault MD3820f

Hi,

You can manage with SNMP the mib files are included with the resource DVD https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=r9g1x&oscode=w12r2&productcode=powervault-md3820f

This SNMP management is only for alert not for strict monitoring.

See documentation : https://www.dell.com/support/manuals/en-us/powervault-md3460/mdseriesagpub/configuration-des-notifications-dalerte?guid=guid-2a45e2d3-89a0-4e41-bb7a-3943d207d418&lang=en-us

If you need to monitor your bay please use the MD storage manager program included into the ressources DVD.

I remain at your disposal

Regards,

hi,

thank you for your feedback.

i configure the snmp in MDSM and i gave a community but no version to set up?? i want the v3 snmp?

how do it please?

thanks,

mejda

As I know the last version implemented into the bay are V2. But read on the release note of the MD3280 latest firmware if it was implemented.

V2 and V3 command still similar except encryption. Because there is no monitoring but trap send by the bay, this version enhancement is not needed.

Regards,