Unsolved
11 Posts
0
1121
August 8th, 2019 11:00
Dell Dimension XPS
I have an old XPS M200s that is working well, however on startup a Device Name = HARMONY message appears 'supporting' An Interface Board or CD. Although this doesn't stop Windows from starting, it is a bit annoying!
RoHe
10 Elder
10 Elder
•
45.2K Posts
0
August 8th, 2019 11:00
Do you by chance have a Harmony remote control from Logitech?
And no one, except you, can see the image you posted until the moderators approve it.
feeble_peasant01
11 Posts
0
August 16th, 2019 07:00
RoHe
10 Elder
10 Elder
•
45.2K Posts
0
August 17th, 2019 18:00
I guess if you don't use the CD drive, you could just disconnect its power cable inside the PC.
speedstep
9 Legend
9 Legend
•
47K Posts
0
August 18th, 2019 07:00
This is a 16 year old IDE system.
There are no working hard drives and the primary and secondary drives are set master and slave with other drives set cable select.
ALL Drives must be set to Cable select for Optical drive and hard drive.
This system is well past end of life end of support.