Unsolved
This post is more than 5 years old
1 Message
0
27820
Wyse-E01_E02-ZeroClient-12.01.0223.3176 cannot install on VMware ESXi 4.1u1
Wyse-E01_E02-ZeroClient-12.01.0223.3176 cannot install on VMware ESXi 4.1u1
Dear Sir,
When we try to install the Wyse-E01_E02-ZeroClient-12.01.0223.3176 to Windows Multipoint server 2011 which is running on a VMware ESXi 4.1u1 server, we got a error message "Incompatible WDDM issue is found on your primary graphics card drivers......"
Could you tell me is there are any solution?
Thank you for your help.
Billy
Rmontalvo1
623 Posts
0
June 3rd, 2015 02:00
More than likely the VMware Video drivers used on the VM are not WDDM compatible. Check with VMware on driver compatibility.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
dhollema
4 Posts
0
June 8th, 2015 05:00
Wyse E02 Multipoint Server 2011 Premium WDDM driver issue
Setup:
Dell 2950
Esxi 5.x
MP Server 2011 running as virtual machine
Thin clients: Wyse E02
I have the same issue. First, all my thin clients seem to register fine with MP but monitors stay in sleep mode. I noticed when I previously installed the thin client device drivers, I see the error that the graphic driver in incompatible with WDDM. So I followed these directions http://kb.vmware.com/selfservice/sea...rnalId=1011709. Now the monitors get out of sleep mode but just have a deep blue glow, no log-on display. What to do? Is it possible to run these E02's in the vm environment that I have?