Unsolved
This post is more than 5 years old
6 Posts
0
176668
HOW TO CHANGE BOOT SEQUENCE
I need help using the
ONETIME BOOT MANAGER (F12)
On an Inspiron 3655 PC
I would like to boot from a USB or DVD disk
What do I need to enter to select the boot device
The menu which I get is as shown here.
UEFI options
Windows boot manager
Onboard NIC (IPV6)
Onboard NIC (IP4)
Other options
Diagnostics
Enter setup
Peripheral device settings (OPROM setting)
Bios flash update
Change boot mode setting
Which option will ask me to select, usb, Dvd or hdd?
If you can help me I would appreciate it
George
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
April 28th, 2016 02:00
Hi,
Thank you for writing to us!
Kindly follow the steps below :
To specify the boot sequence:
Start the computer and press ESC, F1, F2, F8 or F10 during the initial startup screen. Depending on the BIOS manufacturer, a menu may appear.
Choose to enter BIOS setup. The BIOS setup utility page appears.
Use the arrow keys to select the BOOT tab. System devices appear in order of priority.
To give a CD or DVD drive boot sequence priority over the hard drive, move it to the first position in the list.
To give a USB device boot sequence priority over the hard drive, do the following:
Move the hard drive device to the top of the boot sequence list.
Expand the hard drive device to display all hard drives.
Move the USB device to the top of the list of hard drives.
Save and exit the BIOS setup utility.
The computer will restart with the changed settings.
Thanks
Robin
DELL-Jesse L
Moderator
Moderator
•
17K Posts
0
April 28th, 2016 07:00
GRIGORICH,
You can click the link below for information on setting the computer to boot to dvd, usb, etc.
How to enable boot from DVD option with UEFI boot mode enabled. (Windows 8, 8.1 & 10)