Unsolved
This post is more than 5 years old
119 Posts
0
2521
VPLEX Upgrade
Hello,
Can anyone please point me to some videos or links that shows Upgrading VPLEX GeoSynchrony from any version, e.g. from 5.0 to 5.1 etc.
Thanks
Unsolved
This post is more than 5 years old
119 Posts
0
2521
Hello,
Can anyone please point me to some videos or links that shows Upgrading VPLEX GeoSynchrony from any version, e.g. from 5.0 to 5.1 etc.
Thanks
Top
ankur.patel
286 Posts
0
March 28th, 2016 12:00
I made this not too long ago
https://www.youtube.com/watch?v=DUe1ofa3VqE
SunshineM
119 Posts
0
March 28th, 2016 22:00
Thanks, but I have not done upgrade earlier, so need step by step procedure.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
March 29th, 2016 17:00
If you are an EMC employee I would strongly suggest you use Solve Desktop for Vplex and generate an appropriate procedure. If however you are a customer, please contact your account ASE (CE) and get them to submit a CCA and get the relevant resources assigned to the task to do this upgrade.
SunshineM
119 Posts
0
March 30th, 2016 03:00
Ok Thanks.
hernster
1 Rookie
1 Rookie
•
63 Posts
0
April 7th, 2016 11:00
Attached is the doc we followed, however you should be working with EMC to perform NDU on VPLEX (we did). Also, I would advise you work with SA's to validate all host paths before and after the NDU. Good luck.
1 Attachment
VPLEX Upgrade to Geosynchrony 5 3.pdf