This post is more than 5 years old
1K Posts
0
4828
VPLEX - Practice Test
Hi everyone,
I'm taking the VPLEX Practice Exam and have a question on the following two questions (see images below).
For question #30: according to the student guide it's best to create the metadata backups on a different array. However, the practice test shows the answer as "Create four 80GB LUNs from the local storage array and deploy those LUNs to the loca VPLEX cluster as its Metadata volume and backup volumes." This doesn't seem right to me but wanted to hear what everyone else thought.
As far as question #55: I selected the answer as shown in the screenshot. However, that was incorrect. The practice test is telling me that the correct answer is: /var/log/VPlex/cli/capture. Is that correct?
Thank you in advance!
MikeCram
15 Posts
0
December 6th, 2013 09:00
service@VPlex-1-Hop:/var/log/VPlex/cli/capture> ll
total 312
-rw-r--r-- 1 service users 10468 2013-12-06 01:54 ndu-pre-check-session.txt
-rw-r--r-- 1 service users 0 2013-12-06 01:52 ndu-pre-check-stderr.txt
-rw-r--r-- 1 service users 45 2013-12-06 01:53 ndu-pre-check-stdin.txt
-rw-r--r-- 1 service users 10382 2013-12-06 01:54 ndu-pre-check-stdout.txt
-rw-r--r-- 1 service users 105090 2013-12-06 02:53 ndu-start-session.txt
-rw-r--r-- 1 service users 0 2013-12-06 02:06 ndu-start-stderr.txt
-rw-r--r-- 1 service users 49 2013-12-06 02:53 ndu-start-stdin.txt
-rw-r--r-- 1 service users 104960 2013-12-06 02:53 ndu-start-stdout.txt
-rw-r--r-- 1 service users 11414 2013-06-19 17:05 ndu-status-session.txt
-rw-r--r-- 1 service users 0 2013-06-19 17:05 ndu-status-stderr.txt
-rw-r--r-- 1 service users 5 2013-06-19 17:05 ndu-status-stdin.txt
-rw-r--r-- 1 service users 11397 2013-06-19 17:05 ndu-status-stdout.txt
-rw-r--r-- 1 service users 1088 2012-10-18 21:14 Vplexconfiguration-import-certificate-session.txt
-rw-r--r-- 1 service users 34 2012-10-18 21:13 Vplexconfiguration-import-certificate-stderr.txt
-rw-r--r-- 1 service users 26 2012-10-18 21:14 Vplexconfiguration-import-certificate-stdin.txt
-rw-r--r-- 1 service users 694 2012-10-18 21:14 Vplexconfiguration-import-certificate-stdout.txt
-rw-r--r-- 1 service users 1129 2012-09-26 19:39 VPlexconfiguration-session.txt
-rw-r--r-- 1 service users 0 2012-09-26 19:37 VPlexconfiguration-stderr.txt
-rw-r--r-- 1 service users 15 2012-09-26 19:38 VPlexconfiguration-stdin.txt
-rw-r--r-- 1 service users 1043 2012-09-26 19:39 VPlexconfiguration-stdout.txt
-rw-r--r-- 1 service users 71 2013-12-05 22:55 Vplexconfiguration-validate-configuration-session.txt
-rw-r--r-- 1 service users 0 2013-12-05 22:55 Vplexconfiguration-validate-configuration-stderr.txt
-rw-r--r-- 1 service users 0 2013-12-05 22:55 Vplexconfiguration-validate-configuration-stdin.txt
-rw-r--r-- 1 service users 71 2013-12-05 22:55 Vplexconfiguration-validate-configuration-stdout.txt
service@VPlex-1-Hop:/var/log/VPlex/cli/capture>
etaljic81
1K Posts
0
December 5th, 2013 19:00
I agree. However, the student guide has the following:
DonRush
12 Posts
1
December 5th, 2013 19:00
Actually I misread the answers. But my answer still stands. Think about the implications of having a mirror leg of the metadata volume on the remote array.
DonRush
12 Posts
0
December 5th, 2013 19:00
For number 1. Think about the implications of having the backup volumes on the remote array.
Don Rush
Sr Systems Engineer
Federal - RecoverPoint & Virtual Storage
Email: donald.rush@emc.com
Cell: 408-571-8661
1 Attachment
image001.png
etaljic81
1K Posts
0
December 5th, 2013 20:00
Don, I think the practice test is correct. I think the student resource guide from VPLEX training is incorrect. My screenshot in the first post is from the practice test and the answer is correct. The two screenshots I posted afterwards are from the student resource guide. Not sure if you know how/if this can be corrected in the student resource guide.
etaljic81
1K Posts
0
December 5th, 2013 20:00
Unfortunately I couldn't submit feedback.
Thank you for confirming. I hope the real test contains the correct answer if such a question is presented.
DonRush
12 Posts
0
December 5th, 2013 20:00
I am not sure why it says separate failure domains. There has never been a requirement to place metadata backups on a remote array in a metro configuration as described. Plus the first answer changes the customer provisioning practice. Without that slide my automatic answer to that question would have been have the second answer.
I assume through the practice test you can submit feedback. I would point out the inconsistency between the slide and the correct answer.
MikeCram
15 Posts
0
December 6th, 2013 08:00
For question #30:
Until recently, array cross connect was never supported - only host cross connect. Due to this, all volumes including metadata, logging and regular data volumes had to be provisioned from local storage only.
An additional requirement was that the metadata and metadata backups must be placed on different arrays meaning that the metadata mirror must have one leg on one array and the other leg on a different array. The metadata backups must have one volume on one array and the other on a different array. If only a single array were present then there are provisions within the configuration warning about this requirement but allow you to proceed.
The confusion comes in with the statement about "separate failure domains". Everyone seems to think of this as meaning a different datacenter. This is due to the requirements for VPLEX Witness where a separate failure domain does mean a third datacenter. What is meant here by a separate failure domain is what you define as pertaining to what type of failure you are protecing against. As in the case here, a separate failure domain could be different power boundries or a different fire surpression zone within the datacenter even different floors of the building if you are in a flood zone. Specifically, you don't want any single failure to take out both arrays that the logging or metadata volumes reside on.
I mentioned "Until recently". Array cross-connect is now supported strictly for the logging and metadata volumes. Common data volumes must reside at the local site. Additionally, this configuration is limited to those sites that are less than or equal to 1ms latency rtt. This configuration allows additional resiliency for the system volumes when only a single array is present at each site.
I'll respond in a few minutes about the second question. I need to get on a system to verify first.
etaljic81
1K Posts
0
December 6th, 2013 08:00
Thank you Mike. So if I come across a similar question on the exam, what will the right answer be? That's really where my confusion comes from. The student resource guide states exactly what you said but the correct answer in the practice test is: "Create four 80GB LUNs from the local storage array and deploy those LUNs to the local VPLEX cluster as its Metadata volume and backup volumes." I'm sure a similar type of question will be asked on the exam.
Thank you for looking into question #55 as well. The practice test states that the correct answer is "/var/log/VPlexcli/capture." That can't be the correct answer but I'll wait to see what you find.
etaljic81
1K Posts
0
December 6th, 2013 09:00
Ah, good to know. Thank you!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
December 10th, 2013 02:00
Hi,
Can you give me the VPLEX Exam number please? I cannot find it avaialble in the UK and have been waiting for this to come out.
regards
Darren Swift
etaljic81
1K Posts
0
December 10th, 2013 05:00
Sure. It's E20-260 (VPLEX Specialist Exam for Implementation Engineers). See the following link as well that contains practice tests: https://community.emc.com/docs/DOC-17867
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
December 10th, 2013 06:00
ah its the implementation one, i am pre-sales I am not sure they would let me loose ….thank you for the reply.
etaljic81
1K Posts
0
December 10th, 2013 07:00
matteo_marchett
112 Posts
0
January 17th, 2014 07:00
Is this exams for EMC personnel only? thanks.