Unsolved
This post is more than 5 years old
6 Posts
0
3807
Vplex configuration issue with ntp and witness
hello all,
i have an issue with one of my management server on my cluster-2 .
when i try to configure the ntp, i have this error :
VPlexcli:/> configuration sync-time --remote-ip 10.255.x.x -f
The log summary for configuration automation has been captured in /var/log/VPlex/cli/VPlexconfig.log
The task summary and the commands executed for each automation task has been captured in /var/log/VPlex/cli/VPlexcommands.txt
The output for configuration automation has been captured in /var/log/VPlex/cli/capture/VPlexconfiguration-session.txt
configuration sync-time: Evaluation of < > failed.
cause: Command execution failed.
cause: Unknown Exception
VPlexcli:/> cluster-witness enable
: Evaluation of < > failed.
cause: Property 'cluster-witness' is not supported.
VPlexcli:/> configuration cw-vpn-configure -i 172.30..x.x
The log summary for configuration automation has been captured in /var/log/VPlex/cli/VPlexconfig.log
The task summary and the commands executed for each automation task has been captured in /var/log/VPlex/cli/VPlexcommands.txt
The output for configuration automation has been captured in /var/log/VPlex/cli/capture/VPlexconfiguration-session.
configuration cw-vpn-configure: Evaluation of < > failed.
cause: Command execution failed.
cause: Unknown Exception
I can't find any documention on this specific error, everything else is working well on the management server, i can add lun,extent, connect to gui,
it seems like something is off because i don't have any of this issue on the cluster-1 management server. Can you help me ?
Products
11 Posts
0
December 27th, 2016 09:00
As there are no logs included and it is not known which VPLEX this is to see if it can be accessed via ESRS to investigate the matter, If this issue still exists and if you haven't already done so, please open an SR with VPLEX support to assist you with this issue.