Unsolved
This post is more than 5 years old
1 Message
1
603
Monitoring for VNX
May I know can VNX M&R support email alerts? E.g. If the response time higher than 10ms for a LUN in VNX, the VNX M&R will send out an alert.
If this software cannot support this feature, is there other software support this function?
Many thanks.
Rainer_EMC
8.6K Posts
1
July 16th, 2013 05:00
Not right now
The next M&R version available in a few weeks will have a few Pre-defined alerts
Rainer_EMC
8.6K Posts
2
July 24th, 2013 08:00
FYI,
the new M&R 1.1 version was released on Monday July 22nd with new features
see https://support.emc.com/products/28885_VNX-Monitoring-&-Reporting
Chargeback
Beginning with this release, a new Data Enrichment feature called
Chargeback is available. Chargeback calculates cost-of-service for
business units and applications in an organization and displays it
in the Chargeback reports. The VNX Monitoring and Reporting
Administrator assigns a cost-per-gigabyte value to LUNs by RAID
type, tier, and array model. Specific LUNs are then associated with
a business unit and application. Total cost-per-gigabyte for each
business unit and application is calculated based on this
configuration
Heat Map Reports
Heat map reports are now available in this release. A heat map is a
grid in which metrics that have similar values are grouped together
in order to create "hot" and "cold" areas. These values will be
colored according to predefined thresholds. Unlike other types of
reports, visual thresholds for Heat maps cannot be adjusted.
Scheduled Reports
Reports can now be scheduled to run at specific times and be
delivered as PDFs to selected recipients through email. Whenever a
report is scheduled to be generated, it queries the database for the
latest data.
Alerts
Alerts are now available and can be configured to trigger an email
or be captured in an SNMP trap based on when certain
performance thresholds are violated. For example, an Alert can be
configured to trigger whenever storage processor utilization
exceeds 75%. Alerts can also be configured to trigger only for
specific components, such as specific SPs on specific systems. The
Alert email recipients are configurable by alert.
There are six pre-defined alerts available with this release:
Rainer