This post is more than 5 years old
10 Posts
0
1783
wwwpn
hi,
i like to see the wwwpn of HBA ports from the 2 SAN controllers.How is this possible?This is in order to perform zoning.How to map a LUN just created to 2 ports from SAN-LUN mapping?When i create a LUN this can be mapped to any port from the 2 SAN controllers.right?tnx
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
May 30th, 2018 01:00
get the hba WWPN from the host team. which model of VMAX are you using?
niculelu
10 Posts
0
May 30th, 2018 04:00
hi,
vmax 40k.I need to see wwwpn of HBA from SAN in order to perform zoning.
PedalHarder
465 Posts
1
May 30th, 2018 17:00
Since its a 40K, it has been on the floor for some time and there will be zones for the FA ports already in the zone set. The existing zone configuration will surely provide the information you need?
Indeed, the FA WWN ports will already likely have an alias name in the zoning configuration to use in a new zone rather than going to the trouble of working out WWNs.
You can also get the FA port WWN's from the storage team. Thy can run a symcli command to list all the FA port WWNs
symcfg -sid xx list -fa all -v
niculelu
10 Posts
0
May 31st, 2018 05:00
hi,
How to map a LUN just created to 2 ports from SAN-LUN mapping?