Unsolved
This post is more than 5 years old
15 Posts
0
1775
Way to get REST or SymCLI commands used to build Unisphere screens?
Hello,
I am assuming that the management screens in Unisphere are built on top of either SymCLI commands or REST API calls. Is there any type of command/request log, or other way that I can find out how to collect information that is being displayed in the GUI, but that I dont know how to get CLI?
For example, this screen shows the breakdown of a LUN per FAST pool:
I dont know of any SymCLI command or REST call to get this data.
Thanks,
Tanner
KW160
121 Posts
2
October 16th, 2016 19:00
Here is the Solutions Enabler command to query the information you show in your screenshot:
symcfg -sid XXXX list -tdev -dev YYYY -gb -detail
I would suggest the documents below for specific examples:
Solutions Enabler CLI 8.3.0 CLI Reference Guide
Unisphere for VMAX 8.3.0 REST API Concepts and Programmer's Guide
finbarrcorksac
99 Posts
1
October 17th, 2016 01:00
Hi Tanner,
for a good introduction to RESTAPI please see this blog on how to setup the client and get going with it
https://community.emc.com/people/PaulCork/blog/2016/08/12/time-for-a-rest
any questions please let us know.
Regards
Finbarr.
TannerR
15 Posts
0
October 17th, 2016 11:00
Thank you both for the help. I was hoping there was some type of log that could show me exactly what calls were being made to build the Unisphere GUI, but these docs will have to do.
EDIT: I was able to find the following command from this thread:
symaudit -sid XX list -text -last_n 25
It doesn't show the query commands used to collect information, but it does log actions done in the GUI like creating LUN, making SRDF changes, etc...
Thanks,
Tanner