You first need to enable it using symqos command and then create the cache partition with min and max cache allocated % and then you add your devices to these partition. This will keep you cache intensive devices to remain seperate BUT plan your allocation wisely. You may also want to look at the Analyze option before setting it up to find out action cache usage by your application.
For detailed information, check the Solution Enabler array control CLI guide.
sauravrohilla
859 Posts
1
August 20th, 2012 06:00
You first need to enable it using symqos command and then create the cache partition with min and max cache allocated % and then you add your devices to these partition. This will keep you cache intensive devices to remain seperate BUT plan your allocation wisely. You may also want to look at the Analyze option before setting it up to find out action cache usage by your application.
For detailed information, check the Solution Enabler array control CLI guide.
regards,
Saurabh Rohilla
sauravrohilla
859 Posts
1
August 20th, 2012 06:00
In 5875, DCP is seperately licensed SYMM_Model_DCP and in 5876, its part of Enginuity license.
PSR2
21 Posts
0
August 20th, 2012 06:00
Thanks Saurabh for giving this info...
To enable the QOS , do we need to add seperate license keyy ..?
We have VMAX with 5875 code and have SYMM_VMAX_ENGINUITY feature with emclm license P-IND activation Type...
with this can we enable the QOS and configure DCP ..?
PSR2
21 Posts
0
August 20th, 2012 07:00
Thanks lot for the info