Unity VSA 5.3 reboot when join to an AD domain

Question

Hi I have 2 UNITY VSA (5.0.2 and 5.3 recently installed).After creating a NAS server in 5.3 and wanting to join it to an AD domain, it reboots multiple times until it is in service mode with error 0x1200 . I have to clear the counters and reboot to get it back to normal but I can't join the NAS server to the domain.This does not happen with version 5.0.2, which I was able to join without problems.Any ideas?I have searched for error 0x1200 but have not found any information about the problem. Thanks

DELL-Sam L · Answer

Hello fpriore,

Here are a couple of links that you can try to use to resolve your issue. If the steps don’t work then you will need to open a support case for us to resolve this issue for you.

https://dell.to/3DaTGip

https://dell.to/3PC8DRY

fpriore · Answer

Hi SAM.

Thank you for your response.

Precisely these pages are to clear the counters and return to Normal mode. But when trying to join the NAS Server to the domain again, it reboots with error 0x1200.

DELL-Sam L · Answer

Hello fpriore, You will need to open a support case for this issue as all other fixes for error code 0x1200 require tech support to resolve this issue.

Unity

Was this post helpful?