This post is more than 5 years old
3 Posts
0
10470
Venue Pro 11 (7130) and 24" monitors
I have 1 U2412M working with a HDMI to DVI cable, but my second U2412M will not work using an DP to DP cable.
I am using a DP certified cable that I found listed on the displayport.org website.
Is there any 24" monitor (1920x1200 please!) that will work with the Venue Dock?
BTW, For now I am using a Mini-HDMI to HDMI cable and HDMI to DVI adapter to get my second monitor working so I do have a temporary work around.
Mr Livebox
23 Posts
0
March 18th, 2014 16:00
If you have the latest Firmware (A10) and Intel Graphics Driver installed then the DisplayPort stopped working.
See my post http://en.community.dell.com/support-forums/mobile-devices/f/4586/t/19563441.aspx
ukpik
3 Posts
0
March 18th, 2014 16:00
I updated the BIOS to the latest listed on the support site (A10) and now I have no video at all working from the dock.
ukpik
3 Posts
0
March 18th, 2014 17:00
Mine shipped with A10, and the updated BIOS had the same version, but I was desperate, so I was surprised it broke anything.
Anyway, looking at your other thread I was inspired to dig around for older video driver.
I know have DP > DP and HDMI > DVI working and both of my U2412M's are working.
For anyone else reading, I reverted to "10.18.10.3316,A00 12/4/2013 7:47:26 PM" to get this working.