This post is more than 5 years old
8 Posts
0
3196
Venue 8 5830 Pro - Windows 10?
I recently acquired a Venue 8 5830 Pro (that is how the Dell site recognizes it.) I had to do a factory reset since no knew the password. It is now back to Windows 8.1 instead of Windows 10.
I know the Windows 10 "free" period is over but I have access to Windows 10 media. But is there anything "special" about the version of Windows that is on this device? Will a standard ISO work to install Windows 10 on this?
BTW: I did try to go to the Windows 10 download site (https://www.microsoft.com/en-us/software-download/windows10) but after downloading the tool, it said I didn't have enough room -- 5+GB and it needs 8GB. So, I've cleaned the drive but the rest is all OS stuff. WinSxS is takeing 7GB by itself.
Raxe
8 Posts
1
February 10th, 2017 09:00
I was able to clear enough space to run the Windows 10 tool and now have it installed.
vtoy116
307 Posts
0
February 11th, 2017 13:00
I upgraded to Windows 10 32-bit. I used the Media Creation Tool to create installation files on USB media and ran setup.exe. I had to removed partition 6 (Dell Recovery partition for Windows 8) and extend partition 5 (NTFS Windows partition, C: drive) because the upgrade required 5.5 GB of space. Installed the Dell chipset drivers (Intel Atom Z3000 Series Driver, 5830_Chipset_Driver_67YC3_WN32_603.9600.2067.27988_A00.EXE) for Windows 10 because the camera did not work. Windows 10 upgrade created a new partition 6 (Recovery partition for Windows 10).
Raxe
8 Posts
0
February 12th, 2017 08:00
As indicated in my answer, I have it all working. I didn't have to do anything special except free up enough space (8GB) and then install Windows. I had already installed the drivers. All is working.