Unsolved
This post is more than 5 years old
3 Posts
0
12625
PowerEdge T310
Hi: Our server PowerEdge T310, Serv Tag: 2Z2K3L1 HAS A RAID 1 Onboard Controller. Drive 1 failed and I had to swap it. Does anyone know if the RAID1 will auto rebuild on the second drive? Do I have to tell the RAID 1 to do it? How can I check to see if the second drive has been rebuilt?
Thanks,
Pete
Sahil Juneja
38 Posts
0
March 20th, 2014 04:00
Hello Pete, Thanks for the post . Can you confirm if we are talking about PERC S100 controller ?
In case, if the Adapter is PERC S100 then Raid 1 will not auto rebuid.
It is recommended to have a Global Hot Spare disk in such confirguration.
Thanks,
Sahil
Flamencoguy
3 Posts
0
March 20th, 2014 06:00
Yes, it is PERC S100. I got into the RAID1 Configuration and when I try to Initialize the drive for PERC S100, it says that the device is already in use by another virtual drive.
Now I need a full backup because the drive 0 is already degrated. I am desperate for a solution.
Please help.