Unsolved
This post is more than 5 years old
4 Posts
0
1462
iDRAC Config Dell PowerEdge R320 - Login Failure post config
I have done iDRAC config as below, by connecting to the iDRAC port on the Server and browser login.
Post committing these config, I am unable to login to the Dell Server by connecting to the iDRAC port on the Server and browser login.
Also remote connectivity to Server via ssh to OAM VIP is unsuccessful.
How can I revert the changes made to disable DHCP and allocate the default static IP? Please help.
Thanks
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
June 20th, 2017 10:00
Hello
If you can access the host operating system then you can run racadm commands. You should also be able to open a broswer locally. The network settings you changed should not affect access from the host operating system.
If the host operating system supports a browser then you can go to https://127.0.0.1:1311 to access the iDRAC web interface. It should not use the new DHCP address to access it. You can restart the iDRAC with RACADM commands or reset the configuration to defaults.
resart: racadm racreset
reset to defaults: racadm racresetcfg
If you don't have host access then you can set the iDRAC network settings in the LifeCycle Controller/System Services during boot.
Thanks