Unsolved
This post is more than 5 years old
10 Posts
0
25953
Getting HDD alerts from PERC H700 to OME or anywhere!
Hi, all, I expect this is a simple question to answer - and I have tried searching, I promise! But can't find anything.
IHAC who has had a couple of disk failures on his PERC H700. He wants to know how to set-up the alerting through his iDRAC 6 to OME or just to send an SNMP trap to SolarWinds.
Can anyone help?
Thanks
Luke
steven_zessin_D
50 Posts
0
May 15th, 2013 08:00
Hi Luke,
Event message PDR1101 might be what you need, see link below for all messages:
http://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_ent_sys_mgmt/dell-opnmang-sw-v7.2_Reference%20Guide3_en-us.pdf
Page 135 of the user guide talks about alerts:
http://downloads.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-dell-remote-access-cntrllr-7-v1.30.30_User%27s%20Guide_en-us.pdf?c=us&l=en&cs=555&s=biz
iDRAC7 (12G) home page
www.delltechcenter.com/idrac
Hope this helps,
steve
Luke Shutler
10 Posts
0
May 15th, 2013 09:00
Thanks Steve, do you know if there is much difference with the alerting with the iDRAC 6 which my customer has, vs iDRAC 7?
steven_zessin_D
50 Posts
0
May 15th, 2013 10:00
They are similar, but iDRAC7 has some alerts that do not exist in iDRAC6. I do not have a list of the differences.
See page 314 of the iDRAC6 user guide:
ftp.dell.com/.../integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95_User%27s%20Guide_en-us.pdf
Manuals and Documents for iDRAC6 for Monolithic Servers Version 1.95:
www.dell.com/.../integrated-dell-remote-access-cntrllr-6-for-monolithic-srvr-v1.95
iDRAC6 home:
en.community.dell.com/.../4357.idrac6-home.aspx
steve