Unsolved
This post is more than 5 years old
130 Posts
0
1532
SRDF bandwidth utilization
Planning to implement SRDF/A and our network group is giving 2x400mb/s redundant links.They were saying that the bandwidth utilization is up to storage devices means we can throttle 800 out of this.I have this basic question.If we connect these links to two adapter each 400mb,how does Symm distributed the load?Is it going to do load balancing? or is it going to use only one link?
Any thoughts?
Any thoughts?
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
January 16th, 2009 06:00
I have no further details .. I've simply experienced this behaviour in the last few hour .. my customer removed 4 DWDM link, breaking half of our SRDF links .. SRDF handled the issue using only available links .. ..
Now the customer replaced the DWDM link and all RF adapters are spreading the workload between all paths
SRDF have a "PowerPath" inside, spreading the workload and balancing it on every available link .. and resuming paths when links comes back
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
January 16th, 2009 06:00
Quincy561
1.3K Posts
0
January 16th, 2009 06:00
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
January 16th, 2009 06:00
srichev
130 Posts
0
January 16th, 2009 06:00
Quincy561
1.3K Posts
0
January 16th, 2009 06:00
srichev
130 Posts
0
January 16th, 2009 06:00
srichev
130 Posts
0
January 16th, 2009 06:00
RRR
2 Intern
2 Intern
•
5.7K Posts
0
January 27th, 2009 02:00