This post is more than 5 years old
3 Posts
0
947
SnapVX Question Cascading Snaps
Hello,
We have a new VMAX3 and we are learning snapvx. Everything has been working great until we try cascading snaps. So here is the scenario.
Source LUN = 2D
Target1 LUN= 2F
Target2 LUN = 30
We took a snap of 2D and linked that snap to 2F. All the data is there as expected
Next we changed the data on 2F
We then took a snap of 2F and linked to 30 however we are still getting data from 2D.
All of these LUNs do sit behind a vplex however we are doing a cache-invalidate before bringing the disk online and like I said the initial snap and linking to target1 works just fine. Any thoughts would be appreciated.
brmiller1
3 Posts
0
January 15th, 2016 10:00
We were able to resolve this issue by starting over. We must of had the LUNs in the wrong DG. We did change to SG as well.