Symmetrix
Posts
This post is more than 5 years old
Solved!
Go to Solution32 Posts
0
1306
February 27th, 2013 04:00
lun showing different status
please find the attachment... can u please help me to find out why its coming so ??
Responses(15)
17
0
1
56
0
1
32
0
5
47
0
3
78
0
3
No Events found!
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2013 06:00
0D67 is mapped to 9D:0 ?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2013 04:00
run "symcfg discover" for good measures
jeesonmathew
32 Posts
0
February 27th, 2013 04:00
symcfg scan will be enough ???
jeesonmathew
32 Posts
0
February 27th, 2013 04:00
i already run the symmask -sid xxx refresh
jeesonmathew
32 Posts
0
February 27th, 2013 04:00
dynamox: its masked to the wwn in same fa, it is in RW state
thom_chandresh
4 Posts
0
February 27th, 2013 04:00
can you run "symmask -sid refresh" and "symcfg disco" and then check?
jeesonmathew
32 Posts
0
February 27th, 2013 04:00
it will take more time ???
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2013 04:00
so it is masked to the WWN on that FA, is it write-enabled ?
jeesonmathew
32 Posts
0
February 27th, 2013 05:00
E:\Program Files\EMC\SYMCLI\bin>symmaskdb list assignments -dev 0d67
Symmetrix ID : 000290105806
Device Identifier Type Dir:P
------ ---------------- ----- ----------------
0D67 50014380167a23ca FIBRE FA-8D:0
5001438000c1c524 FIBRE FA-8D:0
50014380167a23c8 FIBRE FA-9D:0
E:\Program Files\EMC\SYMCLI\bin>
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2013 05:00
it depends how many arrays you can see from this host (plus ones visible via RDF), but should not take very long.
jeesonmathew
32 Posts
0
February 27th, 2013 05:00
symcfg discover has been run.. then also its showin same result...
jeesonmathew
32 Posts
0
February 27th, 2013 05:00
please find it
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2013 05:00
post output from symmaskdb -sid 5806 list assignment -dev 0D67
Zikas
278 Posts
0
February 27th, 2013 06:00
Hi Jeeson,
how may devices have mapped to this FA?
What type is your Array.
Probably you have to run the command symmaskdb -sid <> list database (really i don't remember this moment) to check on the FA how many devices are masked and which of this devices have the indicator NONE.
You have to delete those masking.
Some times you cannot perform device masking operation because there are no available slots in the VCM databae for the FA port in question. The maximum number of slots available for an FA in the VCMDB type 3 is 32 (it is the most common type for DMX)
The command to delete the NONE masking enrty is: symmask -sid <> -wwn <> delete -dir all -p all
jeesonmathew
32 Posts
0
February 27th, 2013 08:00
thanks dynamox..good..