Search Results (2.9K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi, I am trying to install OMSA on my R660 server. I have downloaded latest available OMSA version from Dell Driver and Download panel. I got package OM-SrvAdmin-Dell-Web-LX-11.0.1.0-5494.RHEL8.x86_64_A00.tar.gz. My server running with RHEL 8.8. [root@rhel8-8 OM-SrvAdmin-Dell-Web-LX-11.0.1.0-5494.R
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello all, Can you please tell me if 8 SFP+ ports is possible and what Network options you'd recommend to get here? There aren't any integrated SFP+ ports correct? Thank you!
Question
•
PowerEdge Hardware General
Community Accepted Solution
Happy Friday all, Needing to know if I can put Intel Xeon Platinum 6268 processors into my R540 server? Thank you!
Question
•
PowerEdge Hardware General
Community Accepted Solution
I get an error on all my servers when I attempt to update the IDRAC. It happens on all my servers. Just says update failed: I tried creating SUU ISO in DRM in 2 ways and all have failed like above: * IDRAC repo * manual repo also tried: * full ISO from DELL's website (~15GB filesize) I managed to
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello all, I have an r230 with only two 3.5 drive bays. I would like to add a PCIe card to boot from mirrored m.2 sata drives. Would the PCIe card with part number 0NTRCY be compatible with an r230 or r330. Thanks for any and all help. Dave C
Question
•
PowerEdge Hardware General
Community Accepted Solution
We found the following error on DIMM B4: Correctable Memory Error Log Limit Reached Can I solve it by removing and then reseating it or do I need to replace the RAM?
Question
•
PowerEdge Hardware General
Community Accepted Solution
I bought a refurbished Dell PowerEdge R220, and it didn't come with a CMOS so I tried to insert a CR2032 battery in, it doesn't work, I'm really new to server management and hardware. If you have a solution please let me know!
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi to all, i am interesed in connecting 2/4 servers for an iSCSI RAID on Windows Server... All job is already done, and everything is working but i have connected them with Crossover cables. I am trying to get, should it work if i connect them with Ethernet cables, as i think that new network
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, On the R720xd. So I have updated the root/calvin password for IDRAC, however when im trying to SSH into using updated credentials, it keeps saying its invalid. Something i missed or is there another username I could use or am i missing something. Regards, Michael
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have an R440 Powered that will not post. I took everything out of the server except 1 cpu, psu, and dimm but it still won't power on. I even had a spare power button but that was not the issue either. The only clue I have to its condition is the diagnostic lights on the system board. DS1 and DS4 a
Question
•
PowerEdge Hardware General
Community Accepted Solution
We have a PowerEdge T130 current BIOS is 2.16.0 and the iDrac is on 2.60.60.60. I know we need to step them up together. Can someone help us with the stepping to the latest version of the BIOS and iDrac? Thanks
Question
•
PowerEdge Hardware General
Community Accepted Solution
Over the past few years, I have accumulated 4x Dell PowerEdge T420 servers from eBay. I tried transferring the ownership of the first one but was denied for some reason. Clicking on them in the Service tab, 3x of the servers seem to be from Canada and I do not have a clue as to any of the informatio
Question
•
PowerEdge Hardware General
Community Accepted Solution
I just purchased a used T630 and I'm upgrading the processors. I'm trying to confirm the correct heat sink for a pair of E5-2696 v4 processors. The Thermal Design Power of the E5-2696 is 150 watts. I'm seeing everything including: WC4DX 412-AADX RMVM3 @ 105W ORMVM3 OKYWYN I'm going NU
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi, I have a T440 without any RAID controllers since I use it with a PCIe NVMe and it keeps complaining on each boot: "The storage BP1 SAS A0 cable is not connected, or is improperly connected." Can I connect the PERC S140 to the 16 bay backplane to get rid of this message? If yes, what ca
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, The R940 no POST and reset periodically. We found out there is problem with PEM. when we unplugged the PEM(Processor Expansion Module) server boots normally but when again plug the interconnect cables of PEM, server no POST and CPU reset. The server running with latest firmwares. How c
Question
•
PowerEdge Hardware General
Community Accepted Solution
The server is working fine with the current configuration (24x32gb sticks) but we tried replacing 4 of the sticks with 64gb ones and the server would get stuck at configuring memory screen We then tried booting the server with A1 and B1 populated ONLY with our new 64gb sticks and it booted up just
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, there are PowerEdge servers with Intel Pentium Gold CPUs, for example G6405T or G6505, and some listings say that there is ECC memory installed, for example this one: https://m.dell.com/h5/m/us/SecondaryInventorySearch?c=us&cs=28&l=en&s=dfb&sign=PXhcOSHtr1T4IOw%2FPR7UdTC
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
I am using r430.I am using 2 units of this equipment.However, the LED on the front bezel is off on one unit, and the rear LED does not turn on even when the i button is pressed.The system is running normally.Which parts should be replaced first?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
we have a DELL PowerEdge T420, which always had a iDRAC7 Enterprise license.After a shutdown due to power failure , the license got lost and fell back to "express". when I try to import license from Dell Digital Locker account I have an error "The license was not imported.The error
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello,I have two Dell R640 servers with the same components, except the motherboard. Here are the two DP/N I have: W23H8 and CRT1G.What are the differences between those two boards?In the server with the CRT1G motherboard, when I plug a PCIe card, and launch a quick diagnostic, I get this error : PC
Question
•
PowerEdge Hardware General