Unsolved
This post is more than 5 years old
63 Posts
0
1837
MirrorView Configuration
Hi,
I am looking for some help in configuring MirrorView between 2 x VNX.
I have the following configured on primary.
A4 - mirrorview - 192.168.30.0
A5 - network 1 - 192.168.40.0
A6 - network 2 - 192.168.50.0
A7
B4 - mirrorview - 192.168.31.0
B5 - network 1 - 192.168.40.0
B6 - network 2 - 192.168.50.0
B7
I have the following configured on DR.
A4 - mirrorview - 192.168.30.0
A5 - network 1 - 10.0.40.0
A6 - network 2 - 10.0.50.0
A7
B4 - mirrorview - 192.168.31.0
B5 - network 1 - 10.0.40.0
B6 - network 2 - 10.0.50.0
I wasnt sure on the MV connections and whether they need 2 networks similar to normal iSCSI. What is the best practice here?
Also - Do the SP's of primary VNX need to be able to connect to SP's of the recovery?
thanks for your help
JB
Johnny_Bravo
63 Posts
0
January 9th, 2013 06:00
Any thoughts on this?
padukone
35 Posts
0
August 13th, 2014 15:00
Johnny-
I'm curious to know your MV replication set up. Did you use iSCSI or FC ?