Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

mani kumar chowdary

4 Posts

8490

July 22nd, 2013 08:00

problem with intel rapid storage technology

i had faced problem while booting my laptop (inspiron 14z 5423) it displays this error "windows setup could not configure windows on this computer’s hardware"   i had turned off intel rapid storage technology by running the appliation , it disapear my harddisk all data init is lost then i changed bios settings to ata mode then hardisk appeared then i make partations  and to boot its works  but now i want to enable the application but it  is not installing , please help me  to install the application

DELL-Amogh G

1.5K Posts

July 22nd, 2013 11:00

Hi mani kumar,

To use Intel Rapid Storage Technology again, you need to install the operating system with ISRT mode enabled in BIOS. You may download and copy Intel Rapid Storage driver to a USB flash drive before starting the OS installation, from the link: http://dell.to/119Wvsj. Please follow the steps below:

  • Initiate the operating system re-installation.
  • On ‘Where do you want to install Windows?’, click ‘Load Driver’ to load Intel Rapid Storage driver. refer to the image below:
  • Connect the USB memory key and click Browse to locate the folder that contains the driver.
  • Continue with the operating system installation.
  • Once the operating system is re-installed, re-enable Intel Smart Response Technology.
  • Launch the Intel Rapid Storage Technology application and go to Accelerate tab.
  • Click Enable acceleration.

Keep me posted with the results. I will be glad to assist further.

View More

View All

No Events found!

Top