1 Rookie
•
3 Posts
0
1692
December 21st, 2020 09:00
T5810 Board Testing with non dell PSU
Hi
I have got two 0K240Y boards with CPU and would like to test this board without disassembling my T5810 Workstation.
Is it possible to use a normal PSU (coolmaster v550 gold) for testing?
Is NVIDIA Quadro NVS 295 compatible to T5810?
Thanks
speedstep
9 Legend
9 Legend
•
47K Posts
1
December 22nd, 2020 07:00
You will have to get a power board for 5810 with cables and remove your power supply and connect to it. Then you need a front panel power button cable etc. What you propose will not work and its not supported. 5810 does not use standard connectors.
As I recall it wont power on if the chassis intrusion switch isn't connected.
speedstep
9 Legend
9 Legend
•
47K Posts
0
December 22nd, 2020 08:00
If you get a power distribution board with cables and a front panel board and cable and chassis intrusion switch
you can remove the power supply and plug the power distribution board without disassembling your working unit.
DELL-Cares
Moderator
Moderator
•
26.5K Posts
0
December 22nd, 2020 03:00
We tried reaching you on a private message asking for the Service Tag but did not receive a response. Please feel free to reply to the private message whenever you are available.
ThomasH20
1 Rookie
1 Rookie
•
3 Posts
0
December 22nd, 2020 06:00
this is not possible
psu has an other voltage pinout
ThomasH20
1 Rookie
1 Rookie
•
3 Posts
0
December 22nd, 2020 08:00
thanks.
Than I have to disassemble my tower for testing the boards