T5610 and low voltage memory compatibility; DDR3 PC3L; 1.35v

It's not stated what brand RAM you're looking at.  Crucial is highly recommended as it's guaranteed to work in Dell's if using non-Dell RAM.  Kingston Value Brand (KVR) almost never works in Dell's.  The volts can be off in off-brands.

If you don't know already, be sure all the RAM sticks are the same capacity, MHz, and brand.

Thank for reply.
I want to bay 8x Samsung DDR3 16GB PC3L 12800R M393B2G70DB0-YK0.

T5610 Owner's Manual

T5610 Spec Sheet

Though I know some people use Samsung RAM in their Dell's, I couldn't find anything to say that your T5610 can take low voltage memory.

Make sure the memory you buy comes with a return policy in case it doesn't work.

Also, according to pg. 43 of the Owner's Manual, Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB). But, all populated channels must have identical configurations. • Memory modules must be installed beginning with the first socket. 

One idea is to verify with Samsung through their website, like by chatting for example, if your T5610 can take the memory you want.  I tried chatting, but they were too busy at the time I tried.

Hi @bmcowboy,

Not that I wanted to pest again, but do you think the above memory will work in a T5610?  I don't know if 1.35v is the normal voltage for it or not.  Samsung sent an email back that didn't answer the compatibility question.

Thanks, bradthetechnut

Hey dude,

This memory module able to run at both 1.35v and 1.5v. Check this out.

However, it's non-ECC RAM and I'm afraid not compatible with T5610. Check this out.

Hi!!

Thanks for your help :)

I think this samsung module is ECC, in all offer I see ECC information.
Look:
https://www.amazon.com/Samsung-Memory-M393B2G70DB0-YK0-Registered-1-35V/dp/B00KR8QR66

What you think?

Thanks!!

Some of those Dell prices are through the roof.  Crucial RAM comes highly recommended as it's guaranteed to work in Dell's.  I think you'll find a better deal.  T5610 Crucial RAM