Unsolved
This post is more than 5 years old
1 Message
0
1297
T3500 won't post
My PC powers on but won't post and has no beep codes. The error code displayed on the case is a blinking 2. Any advise will help, thank you. The pc is a Dell Precision T3500
Tesla1856
8 Wizard
8 Wizard
•
17K Posts
0
July 17th, 2018 18:00
Desktops:
Beep/Flash codes:
2 = No RAM detected.
Maybe Re-seat RAM?
https://dell.com/community/Alienware-General/Alienware-Desktop-General-Hardware-Troubleshooting/m-p/5555517#M57436
speedstep
9 Legend
9 Legend
•
47K Posts
0
July 18th, 2018 06:00
https://www.dell.com/support/article/us/en/04/sln288786/precision-t3500-t5500-t7500-workstations-diagnostic-lights-and-beep-codes?lang=en
A power failure has been detected in one of the onboard system board regulators. This could be caused by a failed system board component or by a plug-in device creating a short on a regulated power rail. (PS_ON asserted, PS_PWRGOOD asserted, SYS_PWRGOOD de-asserted)