Unsolved
This post is more than 5 years old
3 Posts
0
811
SSD on Precision 6500
Hi
I have installed new ssd in Precision 6500 which is showing in bios as online but i can not boot from it and also not showing in windows
can any 1 advise ?
I can take few screenshots from BIOS if it will help
hussain811
3 Posts
0
September 25th, 2018 11:00
hussain811
3 Posts
0
September 25th, 2018 11:00
May be this can give some idea
BotMan
101 Posts
0
September 25th, 2018 12:00
-SNIP- Not an M6500 if it has an H710P RAID controller...
Are you sure of the model number? I have not heard of a Precision 6500. Might it be a T5600?
CharlesIsWorking
2 Intern
2 Intern
•
167 Posts
0
September 26th, 2018 08:00
Yep, BotMan I thought the same thing. This is a T5600 most likely with that PERC RAID controller in there.
So to the OP, did you clear the RAID config and make these non-raid drives? What other drives do you have installed? Which drive has your OS on it? Is your SSD in the primary slot 0 if it has the OS on it?
If you are using the drive singularly, there isn't a need for a RAID config at all.
Did you try and install the SSD as a secondary drive to do some migration from the primary OS drive?