Unsolved
This post is more than 5 years old
2 Posts
0
344
October 8th, 2007 02:00
Troubles iinstalling PP 5.01 on a OpenVZ RHEL 5 kernel
Hi everybody,
we are trying to install PP 5.0.1 on a OpenVZ RHEL 5.0 kernel, and we are getting some troubles.
Installations seemed ok but when we try to start it, it failed because expects a kernel name finished "*el5" and ours is "2.6.18-8.1.4.el5.028stab035.1" (because it is OpenVZ patched).
We modified "enable" script to avoid this check, but we got errors latter because system could not load necessary modules:
# /etc/init.d/PowerPath start
Starting PowerPath: PowerPath driver version magic mismatch
failed
Any ideas.
Thanks a lot.
Frank
we are trying to install PP 5.0.1 on a OpenVZ RHEL 5.0 kernel, and we are getting some troubles.
Installations seemed ok but when we try to start it, it failed because expects a kernel name finished "*el5" and ours is "2.6.18-8.1.4.el5.028stab035.1" (because it is OpenVZ patched).
We modified "enable" script to avoid this check, but we got errors latter because system could not load necessary modules:
# /etc/init.d/PowerPath start
Starting PowerPath: PowerPath driver version magic mismatch
failed
Any ideas.
Thanks a lot.
Frank
No Events found!
fr4nc3sc
2 Posts
0
October 9th, 2007 07:00
emcplib: disagrees about version of symbol struct_module
So, I'm going to try with an older version, hopping that a newer version of PP will come in short and it will be able to work with newer kernel versions.
Does anyone know if there is any kind of prediction on this?
Regards.
Frank