Unsolved
This post is more than 5 years old
118 Posts
0
865
steps need to be done when doing SAN MIGRATION online
Hello,
what is the best practise procedure to reconfigure powerpath when we are making san migration on SUN/Linux hosts online
Note Both old switch and new are connected with ISL.and active zone sets are the same between them.
BR
christopher_ime
2K Posts
0
November 23rd, 2010 02:00
I'll assume that the reconfiguration you are performing might be (but not limited to) any of the following:
The "PowerPath for * Installation and Administration Guide" has a section that covers this and is appropriately named "Reconfiguring PowerPath devices online". You can find both the Solaris and Linux Guides on PowerLink as follows:
Home > Support > Technical Documentation and Advisories > Software ~ P-R ~ Documentation > PowerPath Family > PowerPath > Installation/Configuration
Nollaig1
1 Rookie
1 Rookie
•
137 Posts
0
November 23rd, 2010 03:00
Hello,
The host connectivity Guide for each OS may have some helpful information as well.
Available on powerlink at:
Home > Support > Technical Documentation and Advisories > Host Connectivity/HBAs > Installation/Configuration
Hope this helps,
Nollaig Ex 5951