This post is more than 5 years old
86 Posts
0
3385
Powerpath Errors 2?
OS windows 2003 SP1, Powerpath 5.0.094
Powerpath Administrator-Console Root- EMC PowerPath Admin - Disks - Disk 000
Errors 2
...
For each disks Error is 2.
I do not know what does it means is 2 errors (if it is for how long) or it generates errors ID = 2? Where I could get some info relating to that error?
Powerpath Administrator-Console Root- EMC PowerPath Admin - Disks - Disk 000
Errors 2
...
For each disks Error is 2.
I do not know what does it means is 2 errors (if it is for how long) or it generates errors ID = 2? Where I could get some info relating to that error?
Brion2
154 Posts
0
August 13th, 2009 07:00
An excerpt:
"Total number of times this path transitioned from alive to dead. This is always equal to or less than the total number of HBA I/O path errors. Note that the error count may be different for different LUNs using the same physical paths. This value is cleared at boot time or when powermt restore executes.
On PowerPath Windows 4.5.0 and later, PowerPath periodic autorestore, which is performed automatically whenever Plug and Play takes a device offline or brings a device back online, does not clear the error count."
I hope this helps.