Dell edge t130

Hello, yes your HDD is failed. You can follow up this procedure PowerEdge HDD: How to physically replace an HDD (Hot Swap procedure) ? | Dell US 

 It is recommended to back up your data before proceeding with the replacement process

1. Pre-Removal Instructions:

   • Remove the Front Bezel if installed.
   • From the management software, prepare the hard drive for removal.
   • Wait until the indicators on the hard-drive carrier signal that the hard drive can be removed safely.

2. Physical Drive Disassembly:

   • Press the release button to open the hard-drive carrier release handle.
   • Slide the hard-drive carrier out until it is free of the hard-drive slot.
   • Remove the screws from the slide rails on the hard drive carrier.
   • Lift the hard drive out of the hard drive carrier.

3. Physical Drive Reassembly:

   • Insert the replacement hard drive into the hard drive carrier with the connector end toward the back.
   • Align the screw holes on the hard drive with the set of screw holes on the hard drive carrier.
   • Attach the screws to secure the hard drive.
   • Insert the hard drive carrier back into the hard drive slot until it clicks into place.
   • Close the hard drive carrier handle to lock the hard drive in place.

Hope that helps!