1 Rookie
•
6 Posts
0
26
PowerEdge T710 hangs on booting
After a reboot my (quite old) server hangs on booting.
I ran diagnostics and i attach the messages, also i've tried to reset the NVRAM but the issue still exists.
Any help would be appreciated
thanks
D. <images with private information removed by Mod>
DELL-Marco B
Moderator
Moderator
•
3.5K Posts
0
September 5th, 2024 13:44
If issue is present also in a minimal configuration, removing all peripherals, and only with 1 bank memory, then you have to replace the motherboard.
DELL-Charles R
Moderator
Moderator
•
3.7K Posts
1
September 4th, 2024 14:32
Hello,
Let me gather some more information:
How many processors do you have?
How many DIMMs?
How memory is populated, what slots?
dimi87
1 Rookie
1 Rookie
•
6 Posts
0
September 5th, 2024 06:57
Hello Charles,
I have 2 processors with all of my DIMMs reserved.
That means 18 slots. 144Gb total size with ECC DDR3 and 800MHz
Thanks,
Dimitris
DELL-Marco B
Moderator
Moderator
•
3.5K Posts
1
September 5th, 2024 10:05
Hello,
can you try to troubleshoot the issue with minimum to post, using 1 memory bank and 1 processor?
Here some information about troubleshooting
PowerEdge: Troubleshooting a Server that Does Not Start (No Power, No POST, No Boot and No Video) | Dell US
Thanks
dimi87
1 Rookie
1 Rookie
•
6 Posts
0
September 5th, 2024 11:53
Hello Marco,
I've tried to boot as you mentioned, with one memory and 1 processor but the issue is still there.
Nothing changed.
Regards,
Dimitris