Unsolved
This post is more than 5 years old
1 Message
0
5823
Poweredge 1800 Issue, no image, amber light blinking
Hello,
I recently bought a used Dell PE1800 and I have an hardware issue that I can't really figure out.
Here the specs
Proc: Intel Xeon 3 GHz ( 800 MHz ) - L2 2 Mo (x2)
Memory: 4GB DDR2 SDRAM
Hdd: 2 x 73GB (10K TPM) SCSI U320 80
Chipset: Intel E7520
OS: I don't know since my problem doesn't allow me to check it.
The server can power on without issues, the HDD leds are on the green side, but absolutely no image and there's an amber light blinking on the front and on the back of the case but there's not "error" beeps. I've removed the PCI peripherals, reseated the ram but It hasn't changed anything
My problem is excactly the same as on this video: http://www.youtube.com/watch?v=mpIym37TeAo
Somebody already had a such problem of a poweredge server or do you have any advices ?
Thanks a lot
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 30th, 2011 23:00
If you have already tried booting up with a minimum configuration, and tried clearing the NVRAM using jumpers on the motherboard, then try a single processor and/or reseat the primary processor.