Unsolved
2 Intern
•
40 Posts
0
126
July 17th, 2023 06:00
How to fix "149.55 no irq handler for vector error on PowerEdge 7625 server?
Hello, we bought a Dell Poweredge 7625 server for the institution I work for. I did all the firmware updates of the server. I installed Rhel 8.7. However, when Rhel 8.7 starts, it gives the error "149.55 No irq handler for vector" and goes into emergency mode. I can control it with Control D. But after a while redhat freezes when using redhat. How can I find the source of this problem and solve it?
Thanks for your help
No Events found!
DELL-Charles R
Moderator
•
4.7K Posts
•
25.5K Points
0
July 17th, 2023 11:00
Hello sysoptr,
I am doing some research on this error but have not come up with anything definitive yet.
Do you something that says which component is giving the error?
Do you have one of the HBA listed in >Applies to at the bottom of this page linked below?
It's the only Driver so far that I see that specifies RHEL 8.7 update
Red Hat Enterprise Linux 8.7 Driver 43.00.02.00 for HBA Controllers
https://dell.to/44Ah05e
If you're still under warranty I might suggest to call in to Support and an engineer can do a remote session with you.